Zero Gain Adjustment Signal Conditioner Module

Zero Gain Adjustment Signal Conditioner ModuleFeatures:Zero, Gain, Full scale calibration are available through external multi-turn potentiometer.   Power distribution in input end for function expansion: 5V,12V,15VDC Isolated amplification and conversion on analog signals: 0-75mV/0-10V/0-1mA/4-20mA  Precision grade:0.1, 0.2; nonlinearity grade (in full measuring range) > mV Small Signal Isolation TransmitterInput 0-75mV/0-2.5V/0-5V/0-10V/0-±100mV/0-±5V/0-±10V/0-10mA/0-20mA/4-20mA/0-±10mA/0-±20mA,etcOutput 0-75mV/0-2.5V/0-5V/0-10V/0-±100mV/0-±5V/0-±10V/0-10mA/0-20mA/4-20mA/0-±10mA/0-±20mA,etcIsolation Method:Magneto-electricIsolation voltage3000KVDCpackage DIP 24Pin  Remark  0-10V/0-5V/4-20mA Isolated Converter with Distribution Power(Zero/Gain Adj.)Since its establishment, Sunyuan Technology has been concentrating on the high-tech application research, the development and manufacture of Isolation DC-DC Converters, Signal Isolation Amplifier/Converter modules and Signal Data Acquisition Modules. The techniques applied are in accordance with the international standards and the products have acquired more than 10 certificates of Chinese patent and software copyright. All the products developed and designed by Sunyuan Technology operate well with the key electronic components used in new developing high-tech industry as rail transit, military equipments, national power grid, wind energy, solar power, electric vehicles in China and have high performance in the special operating conditions including industrial grade high/low temperature, shock, humidity and EMC interference,etc. The products are also widely applied to electric power system, telecom, instrumentations & measurements, medical equipments, industrial intelligent control, automotive electronics, security-monitoring system, military industry, etc.Production Management:In August, 2007, the company was certified by the ISO9001:2000.In September, 2012, the company was certified by the ISO9001:2008.Product Technology:In September, 2007, the electronic products were approved as qualified products by Quality Supervision Bureau of Shenzhen City and confirmed that all the technical specifications are in accordance with the design and application criterion.DC- DC Converter:In February, 2004, the first batch of new products passed EMC test, the products were certified by the CE.In January,2006, the second batch of new products passed EMC test, the products were certified by the CE.In November,2005, all the products were certified by the RoHS.Isolation Transmitter/Converter:In January, 2006, the products passed EMC test and were certified by CE.In November, 2005, the products were certified by the RoHS.Data Acquisition Device:In October, 2012, the products passed EMC test and were certified by CE.In August, 2012, the products were certified by RoHS. Pakcaging pictures as bellow:            (SIP pin packaging ,                                                                  DIN35 Rail-mounted packaging)For more information, please feel free to contact us:Other products:Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download: 1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA 2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series 3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F 5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download: 1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC  2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC 4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC 6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter 9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter 11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring 13,ISO F-P-O  Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC14,ISO U(A)-P-F Series: Analog Signal t