Asset & Wildlife Protection Cover/Switchgear Bus bar Insulation Cover/busbar connection insualting cover/Insulation Enhancement cover/UE-BBIC-T7

BBIC-Bus Bar Insulation Connection Cover up to 40.5kVBus bar insulation connection cover "UE-BBIC", A wide range of preformed covers are available for most ofsubstation equipment connections. Customised covers can be made simply and economically by forming ourinsulation materials.Installation is easy with no need to disconnect bus bars. Such covers are held in place with UV- stabilizedplastic nuts and bolts, latches or cable ties, and be easily removed for maintenance. Suitable for applicationsup to 40.5kV.Substation equipment is vulnerable to flashovers caused by accidental bridging of phases, or phase to earth.Usually made by birds, animals, vegetation or airborne debris, flashovers can be very expensive in terms ofdamage to equipment, reduced reliability. Most of event of this nature can be prevented by covering the strategicallyvulnerable bare metalwork.Insulation for energized bus components and connections shall consist of tubing, tape, and other devicesthat are factory-engineered to meet applicable switchgear performance requirements. UE bus bar connectioncovers "BBIC" provide high dielectric strength, adequate thermal endurance at bus operating temperatures,and tracking and erosion resistance.Selection guide  Rated voltage0.6/1(1.2)kV12~24 kV36-42 kVWall thickness1mm1.5-2mm2.5-3.2mmMaterial property  Property Test method Typical data Tensile strength GB/T 1040≥5MPa Elongation at break GB/T 1040≥200% Dielectric strength GB/T 1408.1≥12kV/mm (2mm)Volume resistance GB/T 1410 ≥1012Ω.cm Water awbsorptionGB/T 1034