Product's DescriptionXSAW Series(Single Input and High
Precision)1. Match resistance ruler,
potentiometer.2. Double 4-digit LED display, display range is
-1999 ~ 9999.3.Panel key and switch input zero function.4.0.2
accuracy, the speed of measurement and control can be set 5 ~
200 times per second.5.Panel key and switch input setting
function.6.10 point polyline correction function.7.Optional 1-4
point alarm output. It includes six basic alarm modes: upper limit
of measured value, lower limit of measured value, upper limit of
deviation, lower limit of deviation, upper limit of deviation
absolute value, lower limit of deviation absolute value, and four
standby alarm modes: upper and lower limit of standby
deviation.(Standby alarm:When the instrument is energized, it does
not give an alarm even if it is in the alarm area.When the measured
value enters the no-alarm area, the standby condition is
established, and then the alarm is normal) 8.It shows that
the stability and anti-interference ability are improved compared
with XSA. Basic OperationsPanel & Buttons
(illustrated by the device with dimension 160×80)
No. Name Description 1 Main
display Displaying the measured value (measuring
mode)Displaying the parameter value (configuration
mode)2 Second display Displaying the content (such as
unit, alarm value) controlled by
parameter diS2 (measuring mode)Displaying the parameter
value (configuration mode)3 Alarm output
indicators Indicating the states of alarm
points4 Set SET In the measuring
mode: Hold this button for over
2 seconds to enter the configuration mode.In the
configuration mode: when a parameter symbol is displayed,
hold this button for over 2 seconds to select next parameter
category;when a parameter symbol is displayed, press this
button to select next parameter;When modifying parameter
value, press this button to save the changed
parameter.5 Left ◃ In the configuration
mode:when a parameter symbol is displayed, press this button
to display the parameter value;when modifying parameter value,
press this button to select the digit to be
revised.6 Up Δ In the measuring mode:press
this button to offset the measure
value,preference value will be displayed (can be
used to enable/disable data retention function during
power-off);hold this button for over 2 seconds to restore the
reset point to the measured value.In the configuration mode:when
a parameter symbol is displayed, press this button to select
the previous parameter (hold this button to select the first
parameter of this category);when modifying parameter value, use
this button to the increase the value.7 Down ▽ In
the measuring mode:hold this button for over 1 second to reset
the peak-to-valley value to current gross value.In the
configuration mode:when a parameter symbol is displayed, press
this button to select the previous parameter (hold this button to
select the firstparameter of this category);when modifying
parameter value, use this button to the decrease the
valueSpecifications of Optional Functions
SpecificationRating/ConditionAlarm outputSize 160×80T1~T4Relay
output of alarm point 1 to 4; all SPDT contact relays250V
AC/3Aresistive loadSize 96×48T1~T2Relay output of alarm
point 1 & 2; both are SPDT contact relaysT3Relay
output of alarm point 3, which is a SPST contact relaySize
48×48T1 Relay output of alarm point 1, which is a SPST
contact relay(when T1 is selected, either the function of
communication or retransmitted analog output is available)T2Relay
output of alarm point 2, which is a SPST contact relay(when
T2 is selected, the functions of communication and
retransmitted analog output are unavailable) Digital
inputK1Point 1 digital input(For device of size 160×80
or 96×48, when K1 is selected, either the function of
communication or retransmitted analog output is available; for
device of size 48×48, K1 input is not valid) Analog
outputA1Current output (4~20)mA, (0~10)mA, (0~20)mAPhotoelectric
isolation;Resolution: 1/3000;Load capacity: 600Ω A2Voltage
output (0~5)V, (1~5)VA3Voltage output (0-10)VCommunication
interfaceS1RS232Photoelectric isolation,Response time:
Related products about Miran Xsaw-Double Show Single Input Digital Indicator Match Resistance Potentiometer
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup