Adis16488 Analog Sensor Imu Accelerometer Gyro High Performance Mems Imu Sensor

Adis16488 Analog Sensor Imu Accelerometer Gyro High Performance Mems Imu SensorThe 16488-H-B is an inertial measurement unit (IMU) based on micromachining technology (MEMS), which contains high-performance MEMS gyroscope and MEMS accelerometer, and outputs three angular velocities and three accelerations.16488-H features high reliability and strong environmental adaptability. By matching different software, the product can be widely used in intelligent driving, tactical and industrial UAV, intelligent ammunition, seeker, mobile communication, mapping, stable platform and other fields.  Product featuresThree-axis digital gyroscope:± 450º/s dynamic measuring range;Zero-bias stability: 3 °/H (GJB, 10s, Z-axis), 0.8 °/H (ALLAN, Z-axis);Triaxial digital accelerometer:± 16 G dynamic measuring range;Zero-bias stability: 0.2mg (GJB, 10s), 0.03mg (ALLAN);High reliability: MTBF > 20000h;Guaranteed accuracy within the full temperature range (-40 ºC ~ 70 ºC): built-in high-performance temperature calibration and compensation algorithm;Suitable for working under strong vibration conditions;Interface 1 channel UART, 1 channel SPI, 1 channel CANSpecificationsParameterTest conditionsMinimum valueTypical valueMaximum valueUnitPeg-topDynamic measuring range   450º/sZero bias stabilityAllan variance, Z-axis 0.8 º/hAllan variance, X and Y axis 1 º/h10 s average (-40 ºC ~ + 70 ºC, constant temperature), Z-axis 3 º/h10 s average (-40 ºC ~ + 70 ºC, constant temperature), X axis and Y axis 4 º/hZero biasZero-bias range, Z-axis ±0.07 º/sZero-bias range, X-axis and Y-axis ±0.2 º/sZero bias change over full temperature range, Z-axis1 ±0.02 º/sZero bias change over full temperature range, X and Y axis1 ±0.06 º/sSuccessive Start Repeatability, Z-axis 0.002 º/sSuccessive Start Repeatability, X-Axis and Y-Axis 0.006 º/sDay-by-day start repeatability, Z-axis 0.003 º/sStart repetition day by day, X axis and Y axis 0.009 º/sFfect of linear acceleration on bias 0.002 º/s/gInfluence of vibration on zero bias, change before and after vibration2 0.002 º/s/gInfluence of vibration on zero bias, change before and during vibration2 0.002 º/s/gScale factorScale factor accuracy, Z-axis 0.3 %Scale Factor Accuracy, X and Y Axis 0.6 %Scale factor nonlinearity, Z-axis 0.01 %FSScale Factor Nonlinearity, X and Y Axis 0.02 %FSResolution  3.052×10−7 º/s/LSBBandwidth  200 HzAccelerometerDynamic measuring range  16 gZero bias stabilityAllan variance 0.015 mg10 s average (-40 ºC ~ + 70 ºC, constant temperature) 0.05 mgZero biasZero-bias range 815mgZero bias change in full temperature range, peak-to-peak value1 510mgRepeatability of successive starts  0.5mgRepeatability is initiated on a daily basis   mgZero-bias temperature coefficient 0.050.1mg/ºCScale factorScale factor accuracy  2%Scale factor nonlinearity  0.1%FSResolution  1.221×10−8 g/LSBBandwidth  200 HzCommunication interface1-way SPIBaud rate  15MHz1-way UARTBaud rate 230.4 Kbps1-way CANBaud rate  1MHzSampling frequencySPI 2001000HzUART 200 HzCAN 200  Electrical characteristicsVoltage 3.03.33.6VPower consumption   1.5WRippleP-P  100mVStructural characteristicsSize  47×44×14 mmWeight  50 gUse environmentOperating temperature -40 70ºCStorage temperature -45 75ºCVibration  20~2000Hz,6.06g  Impact  1000g,0.5ms  ReliabilityMTBF  20000 hContinuous working time  120 h1: Calculate the zero deviation of the whole temperature change process, the temperature change rate is ≤ 1 ºC/min, and the temperature range is -40 ºC ~ + 70 ºC;2: Vibration condition is 6.06 G, 20Hz ~ 2000Hz SizeCompany and production line        /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1