Pole Mounted ADSS Cable Suspension Clamp for Aerial Fiber Optic Cable

Product Description1) ApplicationTension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can't cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system. 2) Structure and Raw MaterialShackle--Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.Twisted Chain Link--Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble. Thimble---Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection. Armor Rods----- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.Preformed Dead End -- Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure. 3)Direction1. It is designed to connect continue pole (tower) and Terminal pole(tower), tensile pole or line angles above 25.Pole (tower). The special specification: one unit per Terminal pole (tower), two units per tensile pole (tower), two units per continue pole (tower).2. You can select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or Span Length from Data Sheet.1.1 Low Tensile force Tension Clamp for ADSS CableThe tension clamp is single preformed rods structure, simple and reliable ,convenient and quick installation, It is specially designed for short span length low tensile force ADSS cables. Detailed PhotosProduct ParametersSpecification Model(Without Preformed Rods)Suitable Cable Diameter (mm) Length (mm) Rubber ModelAXJ 1110 0209.0-11.1116TD 1110AXJ 1330 02011.2-13.3116TD 1330AXJ 1550 02013.4-15.5116TD 1550AXJ 1770 02015.6-17.7116TD 1770  Specification ModelSuitable Cable Diameter (mm)Armor Rod Length (mm)Dead end Rod Length (mm)Color CodeANF 0900 0208.1-9.01200700BlackANF 1000 0209.1-10.01200700RedANF 1110 02010.1-11.11200700OrangeANF 1220 02011.2-12.21200700YellowANF 1330 02012.3-13.31200700GreenANF 1440 02013.4-14.41200700CyanANF 1550 02014.5-15.51200700BlueANF 1660 02015.6-16.61200700PurpleANF 1770 02016.7-17.71200700BlackANF 1880 02017.8-18.81200700Red  Specification ModelSuitable Cable Diameter (mm)Armor Rods Length (mm)Dead End Rods Length (mm)Color CodeANF 0900 0308.1-9.01400900BlackANF 1000 0309.1-10.01400900RedANF 1110 03010.1-11.11400900OrangeANF 1220 03011.2-12.21400900YellowANF 1330 03012.3-13.31400900GreenANF 1440 03013.4-14.41400900CyanANF 1550 03014.5-15.51400900BlueANF 1660 03015.6-16.61400900PurpleANF 1770 03016.7-17.71400900BlackANF 1880 03017.8-18.81400900RedSpecification ModelSuitable Cable Diameter (mm)Armor Rods Length (mm)Dead End Rods Length (mm)Color CodeANF 1110 05010.1-11.118001200OrangeANF 1220 05011.2-12.218001200YellowANF 1330 05012.3-13.318001200GreenANF 1440 05013.4-14.418001200CyanANF 1550 05014.5-15.518001200BlueANF 1660 05015.6-16.618001200PurpleANF 1770 05016.7-17.718001200BlackANF 1880 05017.8-18.818001200RedSpecification ModelSuitable Cable Diameter (mm)Armor Rods Length (mm)Dead End Rods Length (mm)Color CodeANF 1110 07010.1-11.126001800OrangeANF 1220 07011.2-12.226001800YellowANF 1330 07012.3-13.326001800GreenANF 1440 07013.4-14.426001800CyanANF 1550 07014.5-15.526001800BlueANF 1660 07015.6-16.626001800PurpleANF 1770 07016.7-17.726001800BlackANF 1880 07017.8-18.826001800RedPackaging & ShippingCompany ProfileFAQ1. What are the payment terms that you support?Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment that are more convenient for you.2. What about the lead time?Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends.3. How about the shipping?When the package is small, we normally choose FedEx, DHL, TNT, UPS, and so on, while the goods have high weight and volume, we suggest using air or sea shipment.4. How can I place an order?(1) Negotiation is agreed upon for the product price and specifications.(2) The Proforma invoice will be sent for confirmation.(3) After the agreement on the proforma invoice, the customer makes the deposit.(4) Manufacturing will be started as soon as the payment is confirmed by our bank.(5) Ship out the goods within the agreed delivery deadline.5. Can you do OEM for us?Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.6. How about the Warranty?There are 12 months for the warranty.While the