Centrifugal Coal Washing Heavy Duty Wear Resistant Water Treatment Slurry Pump

Centrifugal Coal Washing Heavy Duty Wear Resistant Water Treatment Slurry PumpApplication and Features:Type BL. BM, . BH slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series. The frame plates for the typeBL, BM, BH pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber. The shaft seals for type BM, BH, pumps may be adoptable of gland seal or expeller seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Brief Introcustion to Pump Type Selection:Refering to the performance curves of the pump the selected capacity range should be as follows: Pump Type BM, BH: 40-80% for higher density, strong abrasive slurries 40-80% for medium density, medium abrasive slurries 40-120% for lower density, lower abrasive slurries   TypeBM BHAllowable Mating    Max.Power (kw)                        Clear Water Performance            ImpellerCapacity  QHead H(m)Speed n(r/min)Max EFF η(%)NPSH)(m)No of VanesImpel Dia(mm)(m 3 /h)(L/S)1.5/1B-BH1512.6-28.83.5-86-681200-3800402-451522/1.5B-BH1532.4-729-206-581200-3200453.5-851843/2C-BH3039.6-86.411-2412-641300-2700554-652144/3C-BH3086.4-19824-559-521000-2200714-652454/3D-BH606/4D-BH60162-36045-10012-56800-1550655-853656/4E-BH1206/4D-BH60180-39650-1107-61600-1600553-843726/4E-BH1208/6E-BH120360-828100-23010-61500-1140722-955108/6R-BH3008/6E-BH120360-828100-2307-52400-1000702.5-645368/6R-BH300360-828100-2307-52400-1000702.5-6453610/8ST-BH560612-1368170-38011-61400-850714-10568612/10ST-BH560936-1980260-5507-68300-800826576214/12ST-BH5601260-2772350-77013-63300-600773-10596516/14ST-BH5601368-3060380-85011-63250-550794-105106716/14TU-BH120010/8E-BM120540-1440150-40014-60600-1100734-105549  10/8R-BM300   Type BLAllowable Mating Max. Power(Kw)Clear Water PerformanceImpellerCapacity/Q m ³ /hrHead/mSpeed/rpmMax Efficiency/%NPSH/mNos of Vane sImpeller Diameter/mm20A-BL7.52.34-10.86--371400--300030 4152.450B-BL1516.2--769--441400--2800553.5--8519075C-BL3018-1514--45900--2400573--64229100D-BL6050-2527-46800--1800602--3.54305150E-BL120115--48612-51.5800--1500652--64381200E-BL120234--9109.5--40600--1100643-64457250E-BL120396--14258--30500--800772--105550300S-BL560468--25388--60400--950792-105653350S-BL560650--280010--59400--840813--105736400ST-BL560720--33127--51300--700802--105825450 ST-BL5601008--43569--48300--600802--95 933550 TU-BL12001980-792010-50250-475864-1051213Horizontal Centrifugal Slurry Pump 1. Durable slurry pump used for mines and industry solids pumping.2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.3. Slurry pump drive module design which makes the spare parts can be changed easily4. Designed and built for long time with low maintenance for the Heavy brand slurry pump5. Equipped the electric motor or diesel engine with slurry pump according to your requirement6. Long service life for the wet parts of  slurry pump.The Features:1. The wet parts for slurry pump are made of wear-resistant chromium alloy.2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.3. The shaft seal could use the packing seal, expeller seal and mechanical seal.4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.   FAQ1. What Products does BODA pump mainly produce? BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 2. Is BODA direct factory or trader? BODA own foundry workshop, Machining Workshop, and Assembly workshop. Welcome to visit our factory anytime. 3. The Min MQQThe MQQ is one pcs spare parts or one set bare pump4. What information is required for quotes? If you need the spare parts, we need to know the parts Code and material. If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. Welcome to Contact MeShijiazhuang Boda Industrial Pump Co.,Ltd : alisa   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1