Factory Best Seller Reverse Osmosis System Water Treatment Plant RO Water Plant Drinking Water 3000gpd 2000liter

20years experiences Manufacturer supply 250L/H-1000T/H WATER TREATMENT EQUIPMENT! CUSTOMIZED SERVICE IS AVAILABLE!PRODUCT OVERVIEW  ModelCapacityOperationFeed inletMembraneMembraneDesalinationRecoveryPower(T/H)(MPa)(MM)Size(Inch)(Qty)(KW)XSTRO-0.25T0.251.0-1.4DN2040×401≥97%60-80%2XSTRO-0.5T0.51.0-1.4DN2040×402≥97%60-80%2.5XSTRO-0.75T0.751.0-1.4DN2540×403≥97%60-80%3XSTRO-111.0-1.4DN2540×404≥97%60-80%3.3XSTRO-221.0-1.4DN2540×408≥97%60-80%4.5XSTRO-331.0-1.4DN3240×4012≥97%60-80%8XSTRO-551.0-1.4DN4080×405≥97%60-80%16XSTRO-10101.0-1.4DN5080×4010≥97%60-80%22XSTRO-15151.0-1.4DN5080×4015≥97%60-80%32XSTRO-20201.0-1.4DN6580×4020≥97%60-80%42XSTRO-30301.0-1.4DN8080×4030≥97%60-80%55XSTRO-40401.0-1.4DN10080×4040≥97%60-80%65XSTRO-50501.0-1.4DN12580×4050≥97%60-80%65DESCRIPTIONS                                        Reverse Osmosis (RO) MembraneReverse osmosis process is the world's advanced, energy-saving and effective separation technology now, with a filtration accuracy of 0.001 μm, to completely separate and remove all particles of soluble salts, colloids, organics, microorganisms, viruses, bacteria, rust, and heavy metals in water. It requires pressure to force pure water across a membrane, leaving the impurities behind. However, note that reverse osmosis systems are not ideal for treating water that is very hard and/or with significant quantities of contaminants. In this case, to extend the operating life of the membrane, the water should be pre-treated before entering reverse osmosis membranes (filtering, deferrization, etc.).Reverse osmosis(RO) systemXST reverse osmosis water treatment system uses pre-treatment device, including quartz sand filter, activated carbon filter, water softener, security filter and RO reverse osmosis system, with the multiple filtration and separation of water ion technology, the salt and bacteria removal rate can reach 97%-99%, thus providing safe and pure water. Working Process Chart:Raw water tank→ Booster water pump→ Quartz sand filter→ Activated carbon filter→ Water Softener/Anti-scale dosing system→Security filter → High pressure pump→Reverse osmosis system→UV/Ozone generator → Pure water tankDescription of Main PartsS/N.ProcessApplication1Raw water tankStore water, buffering pressure, overcome instability of supplying water by pipe, ensure to supply water stably and continuously for whole system. (Customer provide, because big size will result in expensive freight.)2Raw water pump / booster pumpProvide needed pressure for the pretreatment filters3Quartz sand filter/Mechanical filterFRP or stainless steel vessel as housing, fill quarts sand, it can filter big particles impurities, suspended substances, colloids etc.4Activated carbon filterFRP or stainless steel vessel as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances.5Water softener/ demineralizer/ Na+ exchangerAdopt cation resin to Soften water, cation resin will absorb Ca2+, Mg2+(main elements for composing scale), reduce hardness of raw water, System can make resin intelligently regenerate, recycling6Security filter /PP filterPrevent large particles, bacteria, viruses into RO membrane, accuracy is 5μm,7High pressure PumpProvide needed working pressure for RO system, ensure production capacity of pure water. (CNP pump or customer-specified)8Reverse osmosis(RO) systemCan remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99%dissolved salts. (RO membranes USA Filmtec, Toray, LG,Vontron or customer-specified)9Electrical Control CabinetAutomatic control, Relay /PLC/HIM as optionalWhat's the consumables of the RO reverse osmosis system?and how long should be replaced?The replacement period of all the following consumables will be depend on the feed water quality.FAQ                                                                         Q1. Why I choose your company?A1: Our factory has professional technical team and advanced production line.100% factory quality assurance, 12 months warranty and lifetime maintenance;Q2. Which machine should I choose?A2: It depends on your inlet water quality and output water requirements, we have professional sales team and engineers team, welcome to inquiry.Q3.: The logo, language and color can be customized?A3: Yes, welcome you to sample custom, and also can provide the pictures or requirements for design.Q4: Could you provide the picture and video for our retail advertising?A4: Yes, high-definition pictures will be provided which can be used for your clients, your online shop or official website;Q5: Do you provide installation and training?A5: Yes, synchronous drawings and operation manual will be provided, and also we can send our technician to your site for installation or training if necessary.Q6: What's your machine size?A6: It depends on the output flow requirement and we can make changes according to your space.COMPANY INFORMATIONOUR CERTIFICATION/* January 22, 2024 19:08:37 */