Customized Silicon Carbide Zirconia Alumina Ceramic Foam Filter for Foundry

Product DescriptionFunctions of ceramic foam filterDecontaminate the melting metal liquidSimplified gating systemImprove the metallurgical structure of the castingsReduce imparities of the castingsImprove casting quality rateReduce casting internal re-oxidation defects Reduce the surface defects after machining of the castings Ceramic foam filter is just developed as a new type of molten metal filters to decrease casting flaw in recent years. It  is made from high quality ceramic materials, whose main components are Al2O3, Sic, ZrO2. Ceramic Foam Filter has the characters of light weight, high mechanical strength, large specific surface areas, high porosity, excellent thermal shock resistance, chemical corrosion resistance and high temperature stability in molten metal. With the distributing pores net structure, they are able to increase the surface areas, and absorb the sinter, the liquid metal becomes more pure, waster quality problems such as sand pore and air pore are much less and the cast quality becomes much better. 1.Silicon carbide foam ceramic filter using German imported polyurethane foam sponge as a carrier, silicon carbide mainly squeezed into the foam sponge, and then squeeze out the slurry,the slurry around the foam fiber, after drying, baking at high temperature, polyurethane thermal decomposition, leaving foam ceramic products, namely silicon carbide foam ceramic filter. The silicon carbide foam ceramic filter, with the three- dimensional mesh interconnection structure of foam sponge, can make metal liquid reflect rectification, mechanical screening, filtration cake, adsorption and other filtration mechanisms to effectively improve the purity of metal liquid, reduce waste rate, reduce mechanical processing loss, thus improve production efficiency and reduce production cost. Silicon carbide foam ceramic filter has high strength, good thermal stability, larger than surface area and high size accuracy. It is mainly used to filter and purify the filtration of ductile cast iron, ash cast iron,aluminum, copper and other alloy metal liquid, effectively remove large inclusions in metal liquid, adsorb smell magazines, reduce the content of gas and harmful elements in metal liquid, improve the metal matrix organization, and improve the mechanical properties of castings.2.Alumina ceramic foam filter is mainly applied to the aluminum and aluminum alloys fusant filter equipment of continuous casting, half-continuous casting, gravity casting, and low pressure casting, also applied to other non-ferrous metal precision casting, gas-solid and liquid-solid separation medium, high temperature gas filter, chemical filling, sound absorbing material and catalysis carrier etc.3 Zirconia Foam Ceramic Filter:Adjust the metal flow rate through rectification to reduce secondary inclusion and pores.Reduce casting inclusion and reduce casting waste and welding repair rate.Improve the surface quality and mechanical properties of the castings. Application of Zirconia Foam Ceramic Filter: Filtration of stainless steel, carbon steel and large castings. Physical and Chemical PropertiesMaterialSilicon CarbideColorGrey blackPore Density8-60ppiPorosity80-90%Refractoriness≤1500ºCCompression Strength>1.0MpaVolume-weight0.45-0.65 g/cm3Thermal shock resistance6times/1100ºCApplicationDuctile Cast Iron, Malleable Cast Iron, Gray iron and other Cast Iron  MaterialAlumina ColorWhitePore Density10-60ppiPorosity80-90%Refractoriness≤1200ºCCompression Strength>0.8MpaVolume-weight0.35-0.5 g/cm3ApplicationDuctile Cast Iron, Malleable Cast Iron, Gray iron and other Cast Iron  MaterialZirconia ColorYellowPore Density10-60ppiPorosity80-90%Refractoriness≤1700ºCCompression Strength>1.5MpaVolume-weight1.0-1.5/cm3ApplicationDuctile Cast Iron, Malleable Cast Iron, Gray iron and other Cast IronMainly application:Widely used to filter various steel castings and large cast iron castings, high temperature master alloys and aviation castings, magnetic materials, continuous casting of copper-magnesium alloys and low-pressure casting of non-ferrous metal alloysOur customer's using photo Our package Hot ProductCompany ProfilePackaging & ShippingFAQ1.Q:Are you trade company or manufacture?A:We are manufacture with more than 14 years experience,and the price is the factory price. 2.Q:How to control the quality?A:We have strict quality by QC team. 3.Q:How long is the delivery time?A:It is about 5 days after payment for stoct goods,10-15 days for new producing goods. 4.Q: How to get the sample ?A: Please contact us for send your samples. 5.Q:What is the payment terms?A:Flexible and diverse payment ways can be chosen, make you more convenient .Generally,30% in advance,70% before shipment 6.Q:Can you do OES service?A:Yes,size & shape could be made as customer requirment  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1