Abrasion 90mm3 Ep Nn Chevron Steel Cord Pipe Sw Solid Woven PVC Pvg Bucket Elevator and Rough Top Conveyor Belt

FABRIC RUBBER CONVEYOR BELTSZHENXING conveyor belts are quality products with an extremely high degree of reliability and are the qualified manufacturer of different types of conveyor belts meeting all the requirements in most industrial activities.Conveyor Belt Construction Top CoverDesigned to protect the carcass from service conditions like oil,heat, abrasion, etc.Skim CoatCompounded for excellent adhesion between plies for protecting against ply separation.CarcassExtremely low stretch characteristics of fabric and good troughability.Bottom CoverExcellent in abrasion and fexibility, provides wearing  surface against pulleys and idlers.       COVER RUBBER THICKNESS         Condition             Material           Carried          Lump Size        Belt Cycle        (Second)         0~20        20~60       60~300Moderately AbrasiveAbrasiveVery AbrasiveExtremely AbrasiveFine Coal, Grain,Wood Chips, Ash,Cement, etc.0 ~ 2″ (0~50mm)1/16 ~ 1/8 (1.5~3.0mm)1/16 ~ 3/32 (1.5~2.5mm)1/16 ~ 1/32 (1.5~0.8mm)Sand, Coal,Clay, Salt, etc.  2″ ~ 6″ (50~150mm)1/8 ~ 3/16 (3.0~5.0mm)1/8 ~ 3/16 (3.0~5.0mm)1/16 ~ 3/32 (1.5~2.5mm)Limestone, Crushed Stone,Coke, etc.  6″ ~ 10″ (150~250mm)3/16 ~ 1/4 (5.0~6.0mm)3/16 ~ 1/4 (5.0~6.0mm)1/8 ~ 3/16 (3.0~5.0mm)Ores, Slag, Cullet, etc.8″~ 12″ (200~300mm)1/4 ~ 5/16 (6.0~8.0mm)1/4 ~ 5/16 (6.0~8.0mm)3/16 ~ 1/4 (5.0~6.0mm)   Cover GradeTensile Strength Min.(Mpa)Elongation Min.(%)Abrasion Loss Max.(mm³)DIN - X25450120DIN - W1840090AS - A1740070Note: Abrasion test is based on DIN 53516 POLYESTER FABRIC (EP) CONVEYOR BELTThe combination of polyester in warp and nylon in filling provides technically low-stretch and high impact abuse resistance. •    Special Features  •  High resistance to tension.  •  Low elongation.  •  Outstanding stability dimensionally.  •  Impact resistance.  •  Complete moisture & mildew protection General Conveyor BeltThis Construction, utilizing all nylon, offers maximum impact and damage resistance from material and suitable for transporting a variety of materials(ore, crushed stones, grain, sand, etc.). Several types of carcass using NN/EP fabrics with various thickness are available according to the load conditions. GradeEP100EP125EP150    EP200EP250EP300EP350EP400EP500Min. Tensile Strength     kg/cm-ply     lb/in-ply1001251502002503003504005005607008501,120 1,400 1,680 2,000 2,240 2,800 Working Tension Rating  (Vulcanized)     kg/cm-ply     lb/in-ply10.056.012.570.015.084.020.0112.025.0140.030.0168.035.0200.040.0224.050.0280.0Approx. Gauge per Ply     mm0.91.21.41.51.92.02.12.43.2with skim coat.     inch0.0350.0470.0550.0590.0750.0790.0830.0940.126  NYLON FABRIC (NN) CONVEYOR BELTSpecial Features  •  Exceptionally shock & impact resistance to the carrying surface.  •  Superior in fastener holding ability.  •  Excellent troughability and flexibility  •  Smaller pulley available.  •  Greatest resistance to water and mildew. GradeNN100NN120NN150NN200NN250NN300NN350NN400NN500Min. Tensile Strength     kg/cm-ply     lb/in-ply1001201502002503003504005005606728401,120 1,400 1,680 1,960 2,240 2,800 Working Tension Rating  (Vulcanized)     kg/cm-ply     lb/in-ply8.446.710.056.012.570.016.793.320.8116.725.0140.029.2163.333.3186.741.7233.3Approx. Gauge per Ply     mm0.91.21.31.51.61.82.02.22.7with skim coat.     inch0.0350.0470.0510.0590.0630.0710.0790.0870.106Grade160    200    25031540050063080010001250    1600  20002ply3ply4ply5ply6ply160/2   200/2   250/2   250/3   315/2   315/3400/2400/3400/4500/3500/4500/5630/3630/4630/5630/6   800/3   800/4   800/5   800/6   1000/3   1000/4   1000/5   1000/6   1250/3   1250/4   1250/5   1250/6   1600/4   1600/5   1600/62000/52000/6Flame Resistant Conveyor BeltLorbrand Flame resistant conveyor belt is designed for the bestservice conditions of coal mining industries. It is suitable for mining,power plant, electric utilities, coal cleaning plants. The differentrubber compounds are available in accordance with its requirement.  1.FR-MORGrade is fire resistance with medium oil resistance and accepted by USMSHA(Mine Safety and Health Administration). It is recommended for the typical applications like oil treated coal and grain industries requiring fire & oil resistance, and static conductivity with lower electric resistance than 1MΩ .   2.FR-SBRGrade is SBR fire resistant cover rubber meeting USMSHA (Mine Safety and Health Administration). It provides highly resistanceto wear and cold resistance. 3.FR-GRGrade is specially compounded SBR cover rubber for the under-ground operation requiring fire resistance, static conductivity. The important characteristic is self extinguishable cover rubber. •    Flame ResistantCover Rubber Grade: USMSHA, SABS, DIN, AS, etc.  TypeCover RubberApplicationGrade     Min. Tensile  kg/cm²   psiMin.Elongation(%)FR-MOR     MSHA/MOR(USA)     150    2100400FR-SBRMSHA/SBR(USA)     140    2000400FR-GRISO, DIN, JIS, KS     140    2000400Certiied  USA      • FR-MOR(MSHA/MOR/SC) USMSHA No. 28-85/6                           •