Heat Wear Abrasion Resistant Industrial Ep200 Flat Heavy-Duty Polyester Conveyor Belting Rubber Belt with Factory Price

Product DescriptionRUBBER CONVEYOR BELTProduct ClassificationAccording to whether there is edge glue: moulded edge belt and cut edge belt.According to the framework material: nylon (NN) canvas core conveyor belt (nylon belt, NN belt for short); Polyester (EP) canvas core conveyor belt (referred to as polyester belt, EP belt).Product PurposeIt is widely used in coal, mining, port, metallurgy, electric power, chemical industry, casting, building materials, cement, and other industries and places that need high-speed and fast transportation of materials, and it is used to transport non-corrosive block, granular, powder materials, bulk materials or finished articles.Multi-ply Fabric Rubber Conveyor BeltAccording to the different carcasses used in the fabric conveyor belt, we can supply Nylon(NN) belt Polyester(EP) belt, and Cotton canvas(CC) belt. NN conveyor beltIt is one of the best-quality synthetic fibers used in the rubber industry nowadays. The nylon fabric is woven by nylon fibers in warp and weft, its advantages include high abrasion resistance, high tensile strength, and good fatigue resistance. A nylon belt has the characteristics of a thin belt body, high tensile strength, impact resistance, high adhesion, splendid flexibility, and long working life. It is available for conveying materials of medium and long distances, heavy loading, and high speed.EP conveyor beltPolyester conveyor belt also called EP conveyor belt, its tension resistant body is canvas woven with polyester in warp and nylon in the weft. The belt's advantages include low elongation in warp and good trough ability in weft, heat resistance, impact resistance, good water resistance, good wet strength, no mold, and availability for medium, long-distance, and heavy-duty transportation of materials.CC conveyor beltIt is a traditional conveyor belt, suitable for short and medium-distance materials conveying. The cotton canvas is woven with cotton fibers both in warp and weft, it has low elongation, good in mechanical fastening and adhesion with rubber. CC conveyor belt has small deformation in high-temperature environments, available for short-distance and light-duty transportation of materials. Product ParametersAdvantages:Hot transported material can very easily damage the conveyor belt, to prevent possible damage, special high-temperature resistance canvas with high modulus, low shrink, and high breaking tensile strength is adopted as carcass, and EPDM Rubber or Chloro butyl rubber by mixing some other high-temperature resistant materials and with advanced technique, the belt made better performance in heat resistance. That not only solves the fabric shrinkage and deformation problems but also avoids crucial poor adhesion problems caused by a high degree of saturation of ethylene propylene rubber The belt is excellent in heat resistance, low elongation light, and with longer use life, etc.Standards Offered:DIN22102, RMA, AS1332, SABS 1173/2000, IS 1891, BS490, JIS K 6322, etc.Main Technical Parameters of conveyor beltTypeTextile typeStrength per plyMin.(N/mm)Plies of fabricCover thickness(mm)Belt width(mm)Cover gradeTop coverBottom coverEP beltEP-1001002-82-160-10300-3400Abrasion resistantImpact resistantHeat resistantOil resistantAcid/alkali resistantFire resistantEtc.EP-125125EP-150150EP-200200EP-250250EP-300300EP-350350EP-400400EP-500500NN beltNN-1001002-10NN-125125NN-150150NN-200200NN-250250NN-300300NN-400400NN-500500CC beltCC56563-12   Production Process   The rubber conveyor belts may generally be produced in 5 steps.Mixing → Calendaring →Molding → Vulcanization - Finished Belt1. The initial phase of the production process is to mix the rubber.2.  The calendering process mainly completes the fabric coating, cover sheeting, and bonding of the belt carcass and the covering sheet.3.  Molding is the process of neatly adhering multiple layers of the belt together longitudinally, sticking edge rubber on both sides, and covering rubber on the top and bottom to make a belt blank.4. Rubber vulcanization is one of the most important procedures in the processing of rubber conveyor belts, as well as the final step in the manufacturing process.5. Finished belt after testing.  Certifications  Company ProfileQINGDAO GRAND RUBBERS is one of the leading manufacturers of rubber conveyor belts in China. Our main products include Standard type, High strength type(NN, EP, and steel cord), Pipe type, Chemical resistant, High temperature resistant, Cold-resistant, Anti-tear, etc. Can meet or exceed various RMA, DIN, SANS, and AS1332 standards and Quality Control system had been ISO9001 certified.  Packaging & Shipping     FAQQ1. Are you a manufacturer?Yes, we have mainly produced rubber conveyor belts for over 18 years.Q2. What are your main products?Multi-ply fabric conveyor belts (EP/NN type), steel cord conveyor belts, chevron conveyor belts, sidewall belts, white conveyor belts, bucket elevator belts, filter belts, and special conveyor belts with the