Round Vibrating Screen Screening Machine

Hot xxnx sand vibrating screenIntroductionTrommel screen has wide range of sizes and capacities,it is a mechanical screening machine used to separate materials.It consists of a perforated cylindrical drum that is normally elevated at an angle at the feed end,motor,reduction unit,screen frame and sealing cover.When materials flow towards along the inclined rotating drum,materials jump and roll,he undersized material smaller than the screen apertures passes through the screen, while the oversized material exits at the other end of the drum.  Advantages and Features1.Designed to fit your operation- Trommel screen can be customized to meet different capacity and working site2.Free from pollution- Fully enclosed structure,no dust pollution,improve working conditions for operators as well3.Variable application range-Compost,chemical,coal,plastic,recycling,metallurgy,mineral-selecting etc.4.Superior design-Simple structure,easy maintenance,steady operation,low energy consumption5.Less blockage-Automatic cleaning brush on the top of trommel screen to avoid the blockage6.Screen long life span-Screen is made of 16Mn with strong strength, good abrasion resistance and high screening efficiency. Technical ParametersModelLength RangeSegment No.Aperture SizePower(Kw)Inclined AngleMax. Material SizeRotating Speed(rpm)GTSφ6002-4m1-25-35mm2.2-30-7°50mm15-18GTSφ8002-5m1-35-40mm3-5.50-7°60mm15-18GTSφ10002-6m1-45-50mm4-7.50-7°80mm15-18GTSφ12003-8m1-45-60mm5.5-110-7°100mm15-18GTSφ15003-10m1-55-60mm7.5-1 50-7°150mm15-18GTSφ20004-12m1-55-75mm7.5-l 8.50-7°180mm15-18GTSφ25005-12m1-65-90mm11-l 8.50-7°200mm15-18Note: the parameter above is just for reference,it can be customized by different requirment.Selection Conditions♦Material to be processed: _____♦Max. granule size of the feeding material: _____mm♦Handling capacity (Ps. It means the total♦Segment number: ______material capacity feeding from the inlet): _____t/h♦Mesh size of each layer: _____mm♦Bulk Density: _____t/m3♦Particle distribution percentage:____________♦Material temperature: _____ºC;(please check the following example to help you ♦Water content:____%understand it.Supposing the layer number is 2 ♦Material is corrosive or not: ____ (Ps. Yes or No)and the aperture size of each layer is 10mm and 5mm,♦Material is sticky or not: ____ (Ps. Yes or No)then you will get 3 kinds of products: X,Y and Z.♦Working environment is indoor or outdoor: _____ X≥10mm; 5mm≤ Y < 10mm; Z