Custom Stainless Steel Finned Tube Heat Exchanger Industrial Heat Exchanger Price

Fin Types : L, KL, G, I, Low Fins, Welded Fins, Extruded fins, Crimped Fins etc.Material : Combinations of SS, CS, AL, Copper & Duplex.Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil or gas, or they can be used to capture or recover waste heat. These heat exchangers can used in a broad range of industries including oil & gas, power generation, marine and HVAC&R.Finned tube heat exchangers have a wide range of applications, a few of which are:diesel charge air coolers;oil coolers;hydrogen coolers;waste heat recovery;driers;air conditioning;air heaters;steam condensers;generator coolersFinned tube heat exchangers are often used in circumstances where air is the preferred medium for the cooling or heating, particularly where there is limited or poor quality water.In a finned tube heat exchanger, heat is exchanged between a thermally efficient fluid that transports heat efficiently, such as a liquid which has some viscosity, and a fluid that does not, such as air or gas with little density. On the 'air side', the tube surface is enhanced by the addition of fins or other elements such as looped wires, designed to increase the surface area of the tube and improve its thermal performance.Fins can range in height (high-fin to low-fin) and the fins can be either pressure connected to the outer surface of the tube or formed into the tube surface.Depending on the intended duty and the environment in which they are to operate, finned tubes can be manufactured in numerous designs and incorporate a combination of differing materials for both the tubes and the fins. The types and combinations of tubes and fins is significant, but in this article, we will explore only the more common types.This often-used type of heat exchangers consists of a tube package out of straight finned tubes, which are mostly arranged, staggered in the direction of air flow. The tubes are being welded or rolled in in two opposite tube plates, the distribution of media works via the tube chambers. Those heat exchangers might also be executed with frames or casings.Temperature range: up to 650°CFinned tubes for large heat exchange surfacesGaseous execution possibleMaterial: standard steel and stainless steelHigh stabilityDimensions: up to 6m length and 3m widthWell suited for heat recovery installationsUsable for industrial emergency coolers Tube  1. Copper tube diameter available for 12.7mm ,9.52mm and 15.88mm. 2. Copper tube wall thickness at 0.3-1.2mm 3.Copper tube available for both smooth and grooved. Case  1. White coatedd aluminum or galvanized steel (on customersrequest)high corrosion strength impact resistance and does not produce polluting debris 2.Hinged design make sure convenient maintenance. Fin    1.Hole space available for 25,31.75,38.1 2.Fins space available 2.54-3.175mm 3.Aluminum fins available in both smooth and grooved both standard and blue fins. 4. Medium available for both freon and water.Design  1. Evaporators,condensers are of reasonable structure,good compatibility and can be matched with various compressors. 2.Different refrigerants like R22,R134a and R407c 3. The air cooled Evaporators are tested under air pressure 2.875MPguaranteeing the prducts high gas t/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1