Factory Direct Sale Industrial Stainless Steel Shell Tube Heat Exchanger

Products DescriptionApplication1. Cooling / heating of injection water.2, The injection water point cooling.3. Cooling / heating of pharmaceutical products.4,Clean steam condensing and cooling.5, High clean liquid temperature control.Applicable process points: suitable for pharmaceutical injection water, purified water, water injection and other working conditions, such as: medicine heating, cooling; vaccine and blood products cooling and heating; injection water / purified water heating cooling, etc. Pasteurization, hot water sterilization, etc.  As the cooling flow is bigand its speed is high, so the heat transfer coefficient is high, generally K= 600~700(kcal/m2hºC). It takes small land area when installed vertically, and it can be installed outdoors. The cooling water flows straight at a high speed. Therefore, the requirement for water quality is not very high, and common water can serve as the cooling water. The water scale in the pipe can be easily removed, and it can be done without stopping the cooling system. The temperature rise of the cooling water in the vertical condenser is generally 2~4ºC, and the logarithmic mean temperature difference is generally 5~6ºC, so water consumption is high. As the equipment is put in the air, the pipe will be easily corroded,butleakage will be easily found if it occurs.   Technology ParametersModel NumberHeat Exchange Area(m³)Operating Pressure(MPA)Working Temperature(ºC)Heat transfer coefficient(W/m2K)ZLL10.4-1.20.6-1.0≤120≤350ZLL21.3-3.50.6-1.0≤120≤350...............ZLL12140-1800.6-1.0≤120≤350   Design / Calculation Software   Custom ServiceOur Products for pharmaceutical and chemical industries1. Multifunctional "Three in One" (filtering, washing and drying) 2. Crystallizing Tank, Reaction Kettle 3. Sterile double-cone dryer 4. Rake Vacuum Dryer 5. Plate-fin Heat ExchangerOur advantage1.Special Equipment: Pressure Equipment, Equipment made of anti-corrosion materials, Sterile EquipmentEquipment made of anti-corrosion materials includes: Anti-corrosion lining plastic/ PTFE/ enamel, etc.Ti/HC22/Mone11 2. Customized Design: Double-Cone in 20L-20m³ Rake Dryer (with mechanical seal) in 16 m³ DN300-DN600 "Three in One" 3. Design/Calculation Softwarescope of business1. On-site Inspection2. Technical Innovation Plan for Equipment Technical Improvement Plan for Equipment's Structure Optimization Fast and Effective Solution to Equipment Malfunctions Highly Efficient and Precise On-site Construction Service Commitment to a Deadline in Customization A Full Range of long-term on-site technical maintenance service3. Maintenance 4. Technical Solutions 5.On-site Testing and Training 6. Spare PartsCompany Profile         /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1