Stainless Steel Food Grade Shell and Tube Heat Exchanger for Industrical Field

                        Stainless Steel Food Grade Shell and Tube Heat Exchanger for Industrical FieldThe shell-and-tube heat exchanger is composed of a casing, a heat transfer tube bundle, a tube sheet, a baffle (baffle), and a pipe box. The housing is mostly cylindrical, and a tube bundle is installed inside, and both ends of the tube bundle are fixed on the tube sheet. The two types of hot and cold fluids that perform heat exchange, one flowing in the tube, called the tube-flow fluid, and the other flowing outside the tube, called the shell-side fluid. In order to increase the heat transfer coefficient of the fluid outside the tube, a number of baffles are usually installed in the housing.  Tuber exchanger is the equipment that can transfer certain heat from the thermal fluid to the cold fluid. Tuber exchanger is mainly used for heating and cooling treatment of material during production in the pharmaceutical industry. chemical industry, food industry, light industry etc. The lined pipe heat exchanger can be made of SS304/316 etc. Heat exchanging pipes can be naked pipes or spiral pipes, and the minimum size ca be Φ12x1. The connection between pipes and plates can be welding, expanding connecting, or expanding and welding. It also can be designed and produced according to customer various requirements.Datalist of  Product  Food grade stainless steel shell &tube heat exchangerProfile typeShell and Tube exchangerMaterialSS304 or SS316LCapacity0.1T/H-100T/H (Customized)Working Pressure0.8Mpa(Customized)Heating Area/Cooling Area0.1~20M2The Diameter of PipeΦ6/Φ9/Φ12/Φ16/Φ19/Φ25mmInlet OutletΦ19~ Φ219mmIntroduction of Construction The selection principles of the materials used for pressure components, steel standards, heat treatment status and allowable stress values shall be in accordance with GB 150 standard. Cast iron should be used for pressure components in flammable, lethal or toxic operating conditions.Selection Model and Structure   The strucutre includes a case all over the tube and a saddel to support it. Two flange designed involves connecting flange and hole flange. Clapboard connect the hat-shaped head on one end. Tube sheet and tube bundle insise the shell. 1). Determine the required heat exchange area according to the known flow rates of cold and hot fluids, the initial and final temperatures, and the specific heat capacity of the fluid. 2). When selecting a heat exchanger, pay attention to the pressure level, the operating temperature, and the connection conditions of the interface. Under the premise of pressure drop and installation conditions, the shell-and-tube heat exchanger can be used to increase the heat exchange capacity by using a lengthening type with a small diameter.3). The pressure drop of the heat exchanger should not be too large, generally controlled between 0.01 and 0.05 MPa;4). The flow rate should take into account the viscosity of the fluid, the flow rate of the viscosity should be less than 0.5 ~ 1.0m / s; the flow rate in the general fluid tube should be 0.4 ~ 1.0m / s;Company profile:   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1