Stainless Steel Shell and Tube Heat Exchanger for Thermal Oil and Water

                                Stainless Steel Shell and Tube Heat Exchanger Descripition:shell and tube heat exchanger is a class of heat exchanger designs. It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressuere vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed of several types of tubes: plain, longitudinally finned, etc.So,it is also called Tubular Heat Exchanger.                                                                                                                                                                Theory and Application:Two fluids, of different starting temperatures, flow through the heat exchanger. One flows through the tubes (the tube side) and the other flows outside the tubes but inside the shell (the shell side). Heat is transferred from one fluid to the other through the tube walls, either from tube side to shell side or vice versa. The fluids can be either liquids or gases on either the shell or the tube side. In order to transfer heat efficiently, a large heat transfer area should be used, leading to the use of many tubes. In this way, waste heat can be put to use. This is an efficient way to conserve energy.Shell and tube heat exchanger design:Counter current heat exchangers are most efficient because they allow the highest log mean temperature difference between the hot and cold streams. Many companies however do not use single pass heat exchangers because they can break easily in addition to being more expensive to build. Often multiple heat exchangers can be used to simulate the counter current flow of a single large exchanger.                                                           Please provide the following working parameters, we will provide you with professional design and selection Suggestions.Capacity (Kw/Kcal/h)Hot side medium Cold side medium Flow rate                               Flow rate                                                                             Inlet temperature Inlet temperature outlet temperature outlet temperature Working pressure Working pressure Allowable prssure drop Allowable prssure drop   Contact:  Seana  Web:jm-heat-exchanger.en.made-in-china.com  Applications and uses:1.cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs2.heating other mediums,such as water,beverager,orange juice and other steam3.they are extensively applied in chemical industrial,pertroleum and energy source and etc. Design selection need to provide the following parameters:The Heat Exchanger Tube Specifications Φ20DNQuantity of tube passQuantity of heat exchanger tubeQuantity of center raw tube tube pass flow area(m²)Heat exchanger area(m²)Tube length(mm)1500200030004500600015911550.0030 1.4 1.9 2.8   21913370.0066 3.1 4.1 6.2   27316590.0131 6.1 8.2 12.3 18.4 24.5 25680.0056 5.3 7.0 10.6 15.8 21.1 325199110.0199 9.3 12.4 18.7 28.0 37.3 288100.0088 8.3 11.1 16.6 24.9 33.2 468110.0034 6.4 8.5 12.8 19.2 25.6 4001174140.0350 16.4 21.9 32.8 49.2 65.8 2164150.0165 15.5 20.6 30.9 46.4 61.8 4146140.0073 13.8 18.3 27.5 41.3 55.0 4501237170.0477 22.3 29.8 44.7 67.0 89.3 2220160.0221 20.7 27.8 41.5 62.2 82.9 4200160.0101 18.8 25.1 37.7 56.5 75.4 5001275190.0553  34.6 51.8 77.8 103.7 2256180.0257  32.2 48.3 72.4 96.5 4222180.0112  27.9 41.8 62.8 83.7 The Heat Exchanger Tube Specifications Φ25DNQuantity of tube passQuantity of heat exchanger tubeQuantity of center raw tube tube pass flow area(m²)Heat exchanger area(m²)Tube length(mm)1500200030004500600015911130.0038 1.3 1.7 2.6   21912550.0087 2.9 3.9 5.6   27313860.0132 4.5 6.0 9.0 13.4 17.9 23270.0055 3.8 5.0 7.5 11.3 15.1 32515790.0197 6.7 9.0 13.4 20.1 26.9 25690.0097 6.6 8.8 13.2 19.8 26.4 44090.0035 4.7 6.3 9.4 14.1 18.8 400198120.0339 11.5 15.4 23.1 34.6 46.2 294110.0163 11.1 14.8 22.1 33.2 44.3 476110.0066 9.0 11.9 17.9 26.9 35.8 4501135130.0468 15.9 21.2 31.8 47.7 63.6 2126120.0218 14.8 19.8 29.7 44.5 59.4 4106130.0092 12.5 16.7 25.0 37.5 50.0 5001174140.0603  27.3 41.0 61.5 82.0 2164150.0284  25.8 38.6 58.0 77.3 4144150.0125  22.6 33.9 50.9 67.9 About WarrantyWe promise 10 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fail to work due to quality problem,only the free repairing operation guide  is available in the rest of the 9 years via E-mail /Fax/PhoneCompany Profiles : Guangzhou Jiema is focus on the heat exchanger and spare parts manufacturer since 2005 with over 200 workers . Welcome to visit us : jm-heat-exchanger.en.made-in-china.comWe also provided technical service such as technical consultation, equipment update, capacity expansion scheme,