New Products Laser Cleaning Machine 1000W 1500W 2000W Remove Painting Coating Remover Cleaner Oil Rust Removal Industrial Car Steel Metal Laser Cleaning Machine

SMART HC Series Handheld Laser Cleaning MachineProduct DescriptionOverviewLaser cleaning Machines is a new generation of surface cleaning high-tech equipments. An environmental friendly laser ablation method to replace chemical and mechanical cleaning methods,which is easy of installation, manipulation and automation.  It can remove the surface of the rust, resin, oil, stains, dirt, coating, paint,etc. Laser cleaning is considered to be the most reliable and effective solution because of its non-abrasive, non-contact, non-thermal effect and applicability to various materials. Laser cleaning will be instead of traditional chemical and mechanical cleaning methods for environmental protection and safety. The SMART HC Series Handheld Laser Cleaning Machine produced by HG STAR is a new generation of high-tech surface treatment products, which are easy to install, operate and can be automated. It is simple to operate. Turn on the power, let the equipment on, and the cleaning can be carried out without chemical reagents, medium, dust, and water. It can be fitted to the curved surface, with good cleaning effect. It can remove resin, paint, oil stains, stains, dirt, rust, coating, plating and oxide layer on the surface of objects, and it is widely used in the industry, covering ships, auto repair, rubber molds, high-end machine tools, rails, and environmental protection.Laser cleaning machine is also known as laser cleaner, laser rust cleaning machine, laser paint removal machine, laser paint stripping machine, laser coating removal machine, laser rust removal machine, laser oxide removal machine, laser dirt cleaning machine, laser oil cleaning machine, laser descaler cleaning machine, laser degreasing machine, zinc laser removal machine, laser film removal machine,rubber mold residue laser cleaning machine.  Our AdvantagesHand-held laser cleaning machine, mainly uses laser to burn off metal surfaces, such as rust, paint, etc., and uses metal reflective properties at the same time. Make sure the part itself is not damaged.As long as you take this laser cleaner and sweep over the rusted part, the rust will disappear completely. The principle of this laser cleaning machine is that when the rust is subjected to high temperature, it will evaporate instantly, and after the plasma is separated, due to the high reflectivity of the underlying metal to light, the rust removal part will not be damaged even when exposed to the laser. Therefore, This laser cleaning method is effective and safe, and even perfectly cleans the corners of parts such as letters and bolts. Therefore, it can be easily dealt with whether or not it is difficult to remove rust. Rust has nowhere to hide as long as light can reach it.>>>Non-contact cleaning, no damage to the substrate.>>>Precise cleaning, can achieve selective cleaning of precise position and size.>>>No chemical cleaning fluid, no consumables, safe and environmentally friendly.>>>Simple operation, can be hand-held or fitted with manipulator to realize automatic cleaning.>>>The ergonomic design greatly reduces the labor intensity of operation.>>>High cleaning efficiency and save time.>>>The laser cleaning system is stable and requires almost no maintenance.>>>Optional mobile battery module.Detailed Photos Product Parameters Operating environmentParameter contentSMART HC-1000Voltage220V/380V, alternating current at 50/60Hzpower consumptionlower than 8000W( including water cooler)Working temperature5ºC~40ºCWorking humidity≤80%Optical parametersAverage laser power≥1000WPower stabilitybetter than 5%Power adjustment range (%)10-100(gradient adjustable)Repetition frequency (kHz)20-200(gradient adjustable)Fiber length5-10mcooling methodwater-cooledCleaning head parametersScanning range (length * width)5mm~120mm,Continuously adjustable;scanning frequencynot less than 300Hz Focal length of field lens (mm)160mm(Optional 160mm~500mm)Depth of focusmax. 10mmMechanical parameterOverall size (length, width and height) about 1055mm×620mm×1090mmTotal Weightabout 190Kgcleaning head weight (including isolator)about 1.9KgOperation methodhand-held/automated  Sample    After Sales Service 1. Warranty period: From the acceptance qualified date, the warranty period will be 1 (one) year, but in any case, not more than 13 months after B/L date. Seller is responsible to offer free fittings in these years (except consumable part.) Buyer has to send the damaged fitting to sellers. After the warranty, we will also provide favorable service of long term technical supports and spares supply to ensure machine's stable and continuous running.2. The artificial damage in the warranty period and damage after warranty period, Seller offers paid service. 3. The Seller will give 24 hours service support during warranty time, and giving technical guide by email, telephone, Fax for daily maintenance, if need local support, Buyer has to pay for the travel and accommodation & meal cost for the people from seller's side, no labor char