Ultrasonic Plastic Pallet Welding Machine

Plastic Pallet Hot Plate Welding Machine      Model:BY-160150RB(QD)ItemDetailed InformationProduct IntroductionThis equipment is used for welding of plastic pallets for logistics transportation, with the maximum area of heating plate (300mmX300mm)X9mmHigh power pneumatic or hydraulic structure design, equipment repeated positioning accuracy 0.3mm. 10 sets of welding programs can be pre-stored, and the data interface can run in tandem with the production line. Japan MISUSI original heating device. Hot plate temperature control, with self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees. Equipped with man-machine interface and Chinese and English bilingual interface operation.Production cycle time 55S-65S.Equipment FeaturesMan-Machine EngineeringSafety: the equipment is equipped with emergency stop button and scald warning safety baffle.Permission management: device setting administrator and operator permissions.The work table height is 900MM.Device start mode, single point start.Equipment capability/Quality traceabilityThe device has the protection function of misoperation(the machine will not work if the machine is not operated according to the standard operation procedures).Production records:The equipment can meet customer requirements for recording and storage of product capacity.Alarm failure and code recording:The equipment automatically displays the alarm fault code and records it automaticallyMan-machine interface - visual information of man-machine interface includes current operation steps, alarm information and solutions.IMS interactive function: support Ethernet communication. The equipment has the function of QR Code scanning and identification. The data of hot plate temperature, displacement and time can be recorded and sent to the company's IMS system. (This function is customized according to customer requirements.)Equipment Clamp/Quick die changeThe equipment is fed by the front end and discharged by the back end.The Clamp of the equipment is fixed by simple, fast and reliable fixing method such as locating pin, without special tools.The welding position of the equipment is automatically positioned by the cylinder fixture to ensure the accuracy of the welding position.Electrical layout/SafetyThe equipment is equipped with sensor identification, and the type selected by PLC is different from the current fixture, which will alarm.Locking function - when the product is testing NG, the product is locked in the workstation (requires a designated person to unlock).Device alarm: fault information or corresponding fault code is displayed on the man-machine interface.Control system voltage DC24V.I/O- each station has a 10% I/O allowance for future expansion.Technical ParametersEquipment demension(L)5500MM*(W)4000MM*(H)2200MM.Maximum allowable die size of equipment (L)1400MM*(W)1400MM*(H)250MM.Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.).The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA).Adaptable to ambient temperature: -5ºC~40ºCAdaptalbe to humidity : 20%~80%The noise of the transmission part shall not exceed 90 db.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1