,Auto/Truck Exhaust Pipe Inner Flexible Interlocked /Stripwound
Hose Forming Machine~1. Product DetailsWhat can our machine
produce?1. Round Interlock Hose (2S & 3S) 2. Polygonal Interlock
Hose (2S & 3S) 3. Interlock Hose with Yarm 4. Car / Boat Engine
Flexible Exhaust Pipe Structure2. Machinery Parametera. Machine
No.1: Machine TypeCF-150Available ShapeRound or polygonal
with different forming diesSize rangeID38-150Forming
speed150-350m/8hrsStrip thickness0.25-0.5mmStrip width16 and
20mmPower4KWOuter dimensions3500mmX1200X1600mmWeight950kgsb.
Machine No.2: Machine TypeCF-300Available ShapeRound or
polygonal with different forming diesSize rangeID150-300Forming
speed100-200m/8hrsStrip thickness0.25-0.8mmStrip width16,20, 28,
32mmPower11KWOuter dimensions3500mmX1200X1600mmWeight1200kgsc.
Other Types' Parameter Making
size/mmID38-150ID75-300ID200-400ID38-65Speed
M/H100-120150-400100-120150-400Strip size
/mm16-20*0.25-0.520*0.45m28*0.5-0.815*0.25TypePolygonalRoundroundpolygonal3.
Machine InstructionPrincipal:the machine incorporated advanced
technology,the universal wheels and four pairs of forming wheels
will be applied to form the hose step by step. The size of the
interlock hose will be same as forming mold.Procedure:1. Seven
pairs of wheels are all transmission wheels (refers to wheel
drawings), the first pair of wheel is positioning (refers to wheel
drawing 001).They can not bepressed too hard to prevent too fast
feeding.The allowable tolerance in both sides can not be more than
0.3mm. The third pair are folding wheels(refers to drawing 3),the
folding degree of asymmetry will not be more than 0.3mm.The fourth
pair folding & shaping wheel(refer to wheel drawing 004), the strip
will be folded and shaped to be 90° angle. The fifth pair (refer to
drawing 5) will make 90° angle strip 60° angle.2. After the strip
goes through seven pairs of wheels, wind and fix the strip on the
forming mold, and then press the slot step by step with seven
pressing wheels. Run the machine slowly till the correct hose comes
out.3.The transmission wheels have been adjusted before delivery
from the factory.When adjusting the four center pressing wheels,
please note: the first pair can not be too tight, then the second
will be tighter than first, the other will be by the same way. The
turning direction of center pressing wheels:Adjusting Process:The
seven pairs of wheels(1-7) will be positioned with spacers, the
upper wheel must be in the same center line with lower wheel, do
not fix them. There are spacers inside lower wheels which have been
adjusted before delivery. The spacers outside the wheels will be
pressed by the nuts. The spacers of different thickness will be
used to make sure the lower wheel just in the center of the strip
and both sides folded equally. The five pairs of wheels must be
pressed down parallelly with same force. Make sure the strips are
not damaged when pressing down the wheels.Don't fasten the nuts on
the pressing tools to keep the spring inside can move freely.You
need to put gasket when it is necessary to make tight interlock
hose.When adjust the transmission wheels, it is necessary to loose
all wheels, and then let the wheels fall down freely and then
fasten.Keep the distance between pressing wheel support and the big
plate of the machine 1.5mm one than another clockwise.(for 3-s
machine, it will be 1.0mm)Maintenance:Add the grease in the chain
wheel and chain before start-up and keep the shaft and chain are
greased properly.Run the machine with uniform speed, never
accelerate or reduce the speed suddenly. When start up the machine,
the speed should be less than 400r/min and max. speed should not be
more than 800r/min.Cut off the power supply when the machine is not
running. Fasten the nuts on the wheels and stop them from sliding
and keep check to make sure.4. Company OverviewComflex Industrial
Co.,LtdWe supply all kinds of machines related to hoses, bellows,
and fabric expansion joints with more than 35 years. Meanwhile, we
can also design and manufacture special equipment according your
special requirement. Our machines have been exported to many
countries, such as Ukraine,Russia, Viet Nam, India, Canada,
Australia, Italy, France, UK, Turkey, etc.. We assure you long-term
mutual beneficial cooperation relationship! 5. ApplicationExhaust
hose making machine are widely used to manufacturing exhaust pipe
or flex connectors for the truck. Compared with interlock ASS hose,
the 3-s hose has the following features:Low leakageBetter sealing
performanceFlexibleExhaust connector, Exhaust pipe for the
truck.Industrial flexible metal hose making. SS & sss type, round &
polygonal typeNoSizeProduce speed/hrStrip
size(width*thickness)17mm2004mm*0.22mm29mm2006mm*0.2mm311,14mm2007.1mm*0.2mm416,18,21mm1158.6mm*0.2mm526,29,30mm1009.5mm*0.23mm632,35mm10012.7mm*0.25mm737,42mm10015mm*0.3mm845,51,55mm10017mm*0.35mm960,63,70,76,80mm8021.2mm*0.45mm1089,95,102mm7025mm*0.55mm6.
Packing & Delivery7. Customer Visit8. Certifica
Related products about DN38~400 Stripwound Truck Exhaust Pipe Interlock Hose Making Machine, Car Exhaust Hose Application Interlock Flexible Hose Making Machine~
-
Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
-
Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
-
Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
-
Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
-
G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
-
New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
-
China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
-
Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup