Heatless /Heat Regeneration Compressed Air Dryer Spare Parts

Heatless /heat Regeneration compressed Air Dryer spare partsHeatless (heat ) regeneration type adsorption air dryer machine:1.Adopt desiccant's capillarity adsorption to absorb the moisture in the air, the equipment is designed twin tower type, one tower is adsorbing when the other tower is regenerating under low pressure air condition.2.Air intake temperature under 45ºC.3.Operating controlling method PLC or microcomputer.4.Installation method: stand flat ground foot installation method.Heatless (heat ) regeneration type adsorption air dryer machine:1.Besides the basic principle of the heatless type above, add heating process function and device.In order to achieve to desiccant dehumidification effect, the regenerating low pressure air will be heat before flow into the regenerating tower, and then blow to cool.Can save more energy than heatless type, improve the equipment's reliability and using life, and  the finished air dryness is better than heatless type dryer's.2.Air intake temperature under 45ºC.3. Operating controlling method PLC OR microcomputer.4.Installation method: stand flat ground foot installation method.Technical parameter of Heatless (heat ) regeneration type adsorption air dryer machine:table 1:ModelTKW(R)-1TKW(R)-2TKW(R)-3TKW(R)-6TKW(R)-8TKW(R)-10TKW(R)-15TKW(R)-20rated air flow capacity (Nm3/min)1.22.43.86.58.513.51723working pressure0.6-1.0 (Mpa)air inlet oil content