RO Water Deionized Water Machine 10L, 20L, 30L/H

Applicable to various water quality, the case is with powder coating.The filter element adopts open mold injection technology and inside the machineKorean quick-insert filter column is easy to replace and maintain.The electrical appliance and waterways are completely separated to avoid circuit  failure caused by moisture and water leakage.Online water quality monitoring system, immediately measure the output water quality.Automatic RO membrane anti-scaling flushing program, automatic stop when tap water break, automatic water breaking when machine stop, storage tank automatically fill water, automatic stopping when water is full.Pipeline has function of upgrading water quality and quantity.Equipped with a portable TDS pen, you can test TDS content, conductance, water temperature anytime, anywhere.Double electric water intakes, two kinds water quality, ready to use. Pressure online monitoring.Open door at front and back, this make filters replacement easy&convenient, the replacement can be easily completed without using any tools. Double water intakes: pure water and deionized waterProduct DetailsSystem Filtering ProcessFilter element function: The first stage: PP cotton (PPF filter element with pore diameter of 5 microns) : preliminary filtration of raw water to remove coarse impurities, colloid, suspended matter, etc.Second level: granular activated carbon: efficient adsorption of water odor, heterochromatic, organic matter, some heavy metals, etc.Third stage: compressed activated carbon: further remove residual chlorine, organic compounds, heterochromatic, odor, turbidity, etc.Level 4: RO reverse osmosis membrane: pore diameter 0.0001 micron, effectively remove viruses, heavy metals and other organic impurities in water.Level 5: deionzed purification column ×3, remove most of the heavy metals and trace elements in water, water quality to meet the national laboratory water level 1 water standard.Product technical parametersYB-DI-MICRO series deionized water machineOutput10/20/30 LPHWater requirementsUrban tap water, inlet water pressure: 0.15-0.5mpa, water temperature 5-40ºCRO water parameterIon rejection rate97%-99% (when using a new RO film)Organic matter rejection rate>99% when MW>200 DaltonParticle and bacterial rejection> 99%DI water parameterResistivity (25ºC)10 to 16 m Ω. Cm @ 25 ºCConductivity< 0.1 us/cmHeavy metal ion< 0.01 ppbTotal organic carbon (TOC) *