High Flow Filter Cartridge for Pentair Aqualine ALN05-60B Replacement Equivalent

Product DescriptionGeneral InformationTaFlow Line series polypropylene pleated high flow filter cartridge is specifically developed to provide higher flow solution for particulate removal in clarification and prefiltration of process, representing a highly-optimized pleated filter technology.TaFlow Line is a large diameter, single open ended, pleated cartridge with an outside to inside flow direction, allows for maximum filtration area, extending service life for change-out. The high flow by large filtration area reduces the quantity of filter cartridge and the size of housings required.The polypropylene construction offers broad chemical compatibility. The unique filtration media of polypropylene results in an excellent filtration efficiency, which largely reduces the burden of downstream process for particle removal applications, such as portal water, cooling water, RO systems, oil fields and other industrial fields etc.FeaturesMicron retention ratings from 0.5 to 50 micronsErgonomically designed handle.High surface area, high flow rates with low pressure dropsBenefitsReduce capital expenditure by fewer cartridges and housings used.Reduce operational expenditure by reduced cartridge change-out frequency, downtime, product waste, labour and disposal costs with longer service life.Ideal choice for a wide variety of process applications.Highly durable polypropylene construction, broad chemical compatibility, suitable for rigorous process conditions.Safe, faster and easier filter change-out.Direct and economical filter cartridge replacement.ApplicationsFood & BeveragePharmaceuticalPotable waterProcess waterCooling water for power generationReverse osmosis pre-filtrationPetrochemical and chemicalsIndustrial condensate waterWastewater reuseMunicipal water, etc.SpecificationsEffective Filtration Area (EFA): ≥ 6 m2 (64.6 ft2) per 40" (1016 mm)Materials of ConstructionFilter media: microfiber polypropyleneSupport/Drainage material: polypropyleneHardware: polypropyleneEnd cap: Glass fiber reinforced polypropyleneSealing: Thermal bondO-ring: NBR (nitrile), EPDM (ethylene propylene), SiliconeDimensions (nominal)Outer diameter: 171.5 mm (6.75")Lengths: 1,016 mm (40"), 1,524 mm (60")Removal Rating: 0.5 μm, 1 μm, 5 μm, 10 μm, 20 μm, 50 μmPurity: free of surfactants, resins, binders and adhesives.Regulatory complianceTaFlow Line series filter cartridges are designed, developed and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9001 Quality Systems Standard and are shipped with a Certificate of Quality.All components of TaFlow Line series filter cartridges are Food and Drug Administration (FDA) listed for food contact use in the Code of Federal Regulations (CFR) Title 21 (177.1520 and 177.2600) and conform to the relevant requirements of Regulation (EC) 1935/2004 for their intended food contact applications and USP for the Biological Test for Plastics, Class VI.For easy traceability and identification, every filter cartridge has a lot number.Operating ConditionsRecommended change-out differential pressure: 2.4 bar (35 psi) @ 20°C (68°F)Maximum differential pressure:5.2 bar (75 psi ) @ 20°C (68°F)3.4 bar (50 psi) @ 82°C (180°F) for pleated polypropylene3.4 bar (50 psi) @ 121°C (250°F) for pleated glass fiberMaximum reverse differential pressure: 2.8 bar (40 psi) @ 20°C (68°F)Maximum operating temperature: 82°C (180°F)Recommended maximum recommended water flow rate40" cartridge up to 1,325 lpm (350 gpm), 60" cartridge up to 1,892 lpm (500 gpm).Pressure drop on flow rate:Removal rating (μm)Element pressure drop (mbar/m3/h)Element pressure drop (psi/gpm)0.57.863.82.560.02580.01250.008416.082.941.980.020.00970.006551.480.730.490.00490.00240.0016101.040.520.350.00340.00170.0011200.740.360.240.00240.00120.0008500.460.220.150.00150.00070.0005Unit conversion: 1 mbar = 0.0145 psiOrdering GuideCartridgeMaterialNominal LengthRemoval RatingO-ring MaterialFCTFLPP=Polypropylene40=40"05=0.5 μm10=10 μmN=NBR  60=60"1=1 μm20=20 μmE=EPDM5=5 μm50=50 μmS=SiliconeExample model: FCTFLPP605N refers to TaFlow Line series PP pleated high flow filter cartridge, 60", 5 μm, NBR O-rings, equivalent to Pentair Aqualine ALN05-60B.CertificationsISO 9001:2015 Quality Management Systems CertificateTV Audit CertificateExport LicensePackaging & ShippingOur Advantages1. Customer-centric company culture2. Efficient and flexible organizational system3. 20+ years experience in membrane research, development and manufacturing4. Better cost-effectivenessInquiry Handling ProcessOrder Handling ProcessAfter Sales Service1. Warranty granted.2. Remote technical training, guidance and support.3. On-site technical support for training, installation, commissioning, operation and trouble shooting.4. Free replacement in warranty period.Feedback Handling Process as below:FAQPicking up the phone and having the plant manager yelling at you about undelivered membranes and filters?Your customers are complaining to