R Threaded Anchors Rod T Threaded Anchors Rod The Auto-Placing Hollow Anchor Bar All Thread Anchor Bar High Quality Grouting Bar

Product IntroductionHollow anchor bar means a rod that transfers the structures or geotechnical load to a stable rock formations, anchor bolt consists of bar, drill bit, coupling, plate, grouting stopper and nut. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It's irreplaceable in narrow construction environment. Hollow anchor bar is made of seamless tube with high strength.Features of Hollow Grouting Anchor Bar:• Fits standard Boomer, ROC and Mustang rigs.• Particularly suitable for difficult ground conditions.• A high rate of installation since drilling, placing and grouting can be performed in one single operation.• Self drilling system eliminates the requirement for a cased borehole.• Installation with simultaneous drilling and grouting possible.• Easy installation in all directions, also upwards.• Suitable for working in limited space, height and in areas of difficult access.• Simple post grouting system.• Hot-dipped galvanizing for corrosion protectionAdvantages and Characteristics :1.No casings required, because anchor bars can be drilled into loose soils without needing casings to support the boreholes.2.Fast drilling and installation, because drilling, installation and grouting are in a single operation.3.Both rope threads and trapezoid threads are robust and ideal for rotary-percussive drilling and ensuring a high level of bond with the borehole gout.4.The hollow core not only serves for flushing during drilling, but also for grouting afterdrilling.5.Continuous threads ensure the bars can be cut and coupled at any point, or extended.6.Different anchor bits are available for different ground conditions.7.Duplex anti-crossion prosess ,hot-dip galvanized and epoxy coating system.Product SpecificationR thread anchor bar or called rock rod, soil nail, which is a kind of threaded hollow bar, bar surface with an rope thread according to ISO 10208 & 1720. It was firstly invented by MAI on 1960S to solve the low construction speed on complicated underground works, nowadays; it is very popular all around the world.Thread size: R25, R32, R38, R51, T76.Thread standard: ISO10208, ISO1720 etc.T thread anchor bar surface with a trapezoidal thread, this design of connection is much stronger and reliable when compared with rope thread, we supply full sizes from T30 to T103.Thread size: T30, T40, T52, T73, T103, T127, T130.Thread standard: ISO10208, ISO1720 etc.R-Thread Hollow anchor BarSizeO.D(mm)I.D(mm)Ultimate Load(KN)Yield Load(KN)Weight(kg/meter)R25N-1425.014.02001502.3R32L-2232.022.02201802.8R32N-2132.021.02802302.9R32N-18.532.018.52802303.4R32S-17.532.017.53602803.5R32S-1532.0153602804.1R38N-2138.021.05004004.8R38N-1938.019.05004005.5R51L-3851.038.05504506.0R51L-3651.036.05504507.6R51N-3651.036.08006307.6R51N-3351.033.08006308.4T76N-4976.049.01600120016.5T76S-4576.045.01900150019T-Thread Hollow anchor BarT30-1130.011.03202603.3T30-1430.014.02752202.9T40-1640.016.06605257.1T40-2040.020.05404255.6T52-2652.026.093073010T73-5673.056.0103583010.8T73-5373.053.0116097014T73-4573.045.01600127017.5T73-3573.035.01865143021.2T103-51103.051.03660267044Steel gradeAcc. to EN10083-1 / EN10210-1Thread directionLeft hand / Right hand  Product and Factory DisplayProduct TestApplication ScopeDuring the constructions of underground works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground stress. In the case of serious collapsing, extra-long anchor is needed instead of ordinary one.Technology ProcessThe Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling,anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.1. Connect the alloy drill and anchor rod one end, on the other end, connect the drill sleeve and shank adapter, then connect the drilling rig or hand-held drill. Then start drilling, fill the cooling water while drilling.( If you want to lengthen the anchor rod, can connect the coupling, and then drilling)2. Take down the drill, put the stop-grouting plug into the rod, and insert it to the hole, then ready to grout. Special circumstances like surrounding rock grouting tension is over or surrounding rock is too broken, can use anchor agent to seal the hole.3. Connect quick grouting coupling and anchor rod end, connect other end of grouting machine.4. Start grouting, when grouting full and reach design value then power off. Grouting pressure according to the design parameters and grouting machine performance determine, Cement/sand reference values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~ 0.5:1.5. Install anchor plate and nuts, and tighten nuts.Packaging and ShippingThe packaging is packaged in t