Smaraad China Factory 2000W 48V MPPT Wind Generator Solar Panel Charge Controller

Smaraad China Factory 2000W 48V MPPT Wind Generator Solar Panel Charge ControllerProduct DescriptionGeneral Safety InformationØ Before receive the product, check it carefully. Make sure whether the product is damaged during transport. If it is damaged,contact the shipping company or our company immediately.Ø All installation and electrical work must only be performed by professional personnel.Ø Without any professional guidance, do not disassemble or attempt to repair the controller.Ø Do not use the controller without batteries.Ø Do not cut off the connection of controller and batteries when controller is working normally.Ø Keep children away from controller.Ø Do not allow water to enter the controller.Ø Confirm that power connections are tightened to avoid excessive heating from a loose connection. Make sure cables are suitablefor systemProduct Parameters                          MAX-T12/24-W2000S200II-1Battery parametersApplied battery voltage12/24V Battery protect methodReverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load)Voltage at the over voltage protection point14.5/29.0V±0.2VVoltage at the over voltage recovery point13.5/27.5V±0.2V Voltage at the under voltage protection point10.5/21.0V±0.2VVoltage at the under voltage  recovery point11.5/23.0V±0.2VBattery temperature compensation5mv/ºC/2V (settable) (optional component)Wind turbines input parametersRated power of applied Wind turbines1000W/12V 2000W/24VRated power of the terminal60A dc (after rectification)Max. input current of the terminal100A dc (after rectification) The default speed of the Wind turbines generation with limited speed500 Rpm (settable)The default current of the Wind turbines generation with limited current100A (settable)Wind turbines protection methodover rev protection, over current protection, induction lightening protectionUnloading methodPWM stepless high-frequency soft unloading (built-in)MPPT functionBoost MPPT model ( automatic tracking or 5 segments curve tracking) Input current of MPPT channel24APV input parametersRated input current of applied PV100W/12V 200W/24V(standard)Rated input current of terminal10A(standard) Charging voltage drop