Hydraulic Direct Control Valve of 4we6 4we10 4wh 4we3 4we4 12V/24V Solenoid Directional Valve/Pressure Reducing Valve/Loader Valves/Back Pressure Valve

Rexroth hydraulic valve 4WE6 4WE10 4WE6E/62EG24N9K4 solenoid directional valve   Product Description 4/3-, 4/2- or 3/2-way versionPorting pattern according to ISO 4401-03-02-0-05 (withor without locating hole) and NFPA T3.5.1 R2-2002 D03High-power solenoid, optionally rotatable by 90°Electrical connection as individual or central connectionManual override, optionalSpool position monitoring, optionalCE conformity according to the Low-Voltage Directive2014/35/EU for electrical voltages > 50 VAC or> 75 VDCSolenoid coil as approved component with UR markingaccording to UL 906, edition 1982, optionalApproval according to C22.2 No. 139-1982, optional Product Parameters The directional valves of type WE are solenoid-actuated directional spool valves that can be used as electro-magnetic component. They control start, stop and direction of a flow. The directional valves basically consist of the housing (1), one or two electronic solenoids (2), the control spool (3), and the return springs (4). In the de-energized condition, the control spool (3) is held in the central position or in the initial position by the return springs (4) (except for version "O"). If the wet-pin electronic solenoid (2) is supplied with power, the control spool (3) moves out of its rest position into the required end position. In this way, the required direction of flow according to the selected symbol is released. After the electronic solenoid (2) has been switched off, the control spool (3) is pushed back into its central position or into its initial position (except for valves with "OF" detent and valves without type "O" spring). A manual override (5) allows for the manual switching of the valve without solenoid energization. For unobjectionable functioning, the hydraulic system has to be bled properly. Without spring return "O" (only possible with symbols A, C and D) This version is a directional valve with two spool positions and two electronic solenoids without detent. The valve without spring return at the control spool (3) has no defined basic position in the de-energized condition. generalSize6WeightValve with one solenoidkg1.45Valve with two solenoidskg1.95Installation positionanyAmbient temperature rangeNBR seals°C-20 … +50FKM seals°C-15 … +50Version for HFC hydraulic fluid°C-20 … +50Low-temperature version 1)°C-40 … +50Storage temperature range°C+5 … +40MTTFD values according to EN ISO 13849 2) Years3001)For the use at low temperatures, see Project planning information2)For further details, see data sheet 08012    Quantity(pieces)1 - 5>5Lead time (days)10To be negotiatedPackaging & ShippingCompany Profile /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1