Wide Range Universal Coupling for Different Materials and of Various Outside Diameters

Universal couplingEnables the mechanical jointing of pipes made of different materials and of various outside diametersDescriptionWide outside diameter range: an average of 29 mm.High performance- Permanent leak tight joint when compressing the gasket between the end ring and the sleeve onto the pipe surface- Epoxy powder coating (250 μm) and Geomet® 500 Gr. B for the bolts.Ease and speed of installation:- Angular deflection ± 5° by side.- Absorbs expansion and contraction.- Accommodates misalignment.- Important setting gap.Conformity to standards- EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.- NF A 48-830: Foundry products - Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,- EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines - requirements and test methods,- ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.Approval:- Drinking water approved (WRAS).Note:- This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.- Not recommended for PE pipes.Technical dataRange: DN 40 to 600.(Higher DN, please consult uUniversal couplingEnables the mechanical jointing of pipes made of different materials and of various outside diametersDescriptionWide outside diameter range: an average of 29 mm.High performance- Permanent leak tight joint when compressing the gasket between the end ring and the sleeve onto the pipe surface- Epoxy powder coating (250 μm) and Geomet® 500 Gr. B for the bolts.Ease and speed of installation:- Angular deflection ± 5° by side.- Absorbs expansion and contraction.- Accommodates misalignment.- Important setting gap.Conformity to standards- EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.- NF A 48-830: Foundry products - Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,- EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines - requirements and test methods,- ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.Approval:- Drinking water approved (WRAS).Note:- This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.- Not recommended for PE pipes.Technical dataRange: DN 40 to 600.(Higher DN, please consult us)Max. working pressure: PN 16Temperatures: from +0° to +60°C.Torque: 35 Nm. DN40-DN300, 60-70Nm DN350-DN600ApplicationsDrinking water networks.Pumping, treatment, water tank.Fire protection networks.Irrigation networks.Sewage networks and rain waters drainage (WC type - NF EN 681-1).TestsSealing tests according to standards ISO 2531 and EN 14525.s)Max. working pressure: PN 16Temperatures: from +0° to +60°C.Torque: 35 Nm. DN40-DN300, 60-70Nm DN350-DN600ApplicationsDrinking water networks.Pumping, treatment, water tank.Fire protection networks.Irrigation networks.Sewage networks and rain waters drainage (WC type - NF EN 681-1).TestsSealing tests according to standards ISO 2531 and EN 14525.2.Pipe Materials  3.DrawingAbout AvanntoShipmentsValve World ExhibitionFAQDear Customers, the following questions are frequently asked by our customers, we put them as following, if you still have any questions haven't been answered following, you can call our 24 hours telephone No. to get your quick answer.1. What are your office hours?You can reach us from 9:00 A. M. to 9:00 P. M. GTM+8, Monday to Friday, except weekends.Phone: 0086-10-88716539  2. How soon can I get a price quote?Once we know the Size, material, drive method we can provide you with one competitive price quote within 24 hours.3. Can I get a sample?Yes, the samples are free for you. But you need to offer one courier account NO. to afford the fee for samples shipping. The samples' sending usually takes 5-7days.4. How can my order produced by my brand?Yes, you can. Pls offer your brand or LOGO design to us(.AI or.PSD format), then we could produce all goods with your brand or LOGO.5. What's your delivery time?Except our legal holiday, it will take 2-4 weeks for us to finish all your orders' production.6. Is there a minimum order requirement?Due to the high machine setup cost and shipping freight, our minimum order quantity is 5pcs7. Do you have butterfly valve related accessories?Yes, we have. We have accessories: pneumatic actuators, electric actuators, limit switches, solenoid valves, etc.8. Will you match competitors' prices?If you find a lower price elsewhere for the exact same specification, we will meet or beat that price as long as it is a little higher than our cost price.9. What are your terms of delivery?We accept FOB, CIF etc. You can choose the one which