Hydr-Star Ahp06-2D-300 50000 Psi Output Small Gas Driven Water Pumps

Basic Info.Model NO.AHP06-2D-300After-sales ServiceFree Online SupportWarranty1 YearMax.Head10-30mMax.Capacity50-100 L/minPressure MediumOil, Water and Other LiquidTypeHandheldCertificationCE, ISO, AtexPower Pneumatic Pump TypeDouble Drive Double ActingModel No.Ahp06-2D-300Driven PowerCompressed AirMax. Pressure50000 PsiMax. Flow2.0 L/MinInlet Ports1/2′′ FnptOutlet Ports1/4′′ HfActual Ratio360:1MediumHydraulic Fluids, Water, Solvents, Mild ChemicalsApplicationfor Charging Cylinder, Pressure Test, etcCertificateISO9001:2015, CE, AtexTrademarkHYDR-STARTransport PackageFoam Inside, Carton Box /Wooden Box OutsideSpecification316 stainless steelOriginChinaHS Code8413501090Product Description Product ParametersHYDR-STAR AHP06-2D-300 50000 PSI Output Small Gas Driven Water PumpsItemValueModel NO.AHP06-2D-300Max. Pressure50000 PSIMax. Flow2.0 l/minMediumhydraulic fluids, water,solvents, mild chemicals,liquefied gasesApplicationPressure testing,  Jacking and Lifting, Valve actuator control,  Hydraulic cylinder actuation,  Roller tensioning,  Precision lubrication and spraying,  Work holding and power clamping,  Liquefied gas transfer,  Machine tools,  Well Control PanelWarranty1 yearProduct DescriptionAir driven liquid pumpAir driven liquid pumps operate on the principle of differential working areas. An air piston drives a smaller diameter plunger or piston to provide a pressure ratio.The pressure ratio is the method of determining maximum outlet pressure available. HYDR-STAR model numbers reflect the nominal pressure ratio of the pumps. HYDR-STAR liquid pumps will cycle automatically when compressed air is first applied to the drive. It will start cycling at its maximum speed thus producing maximum fluid flow. At this stage, the pump is acting as a transfer pump, filling the pressure system with fluid. As resistance increases in the system (creating back pressure to the pump), the pump will decrease its reciprocating action. Back pressure in the system finally balances with the incoming air drive pressure times the ratio. At this point, the pump will stall and maintain pressure without consuming any energy. If there is further demand on the system for flow, the pump will automatically start cycling again.The series and its functionsHYDR-STAR pumps offer the right solution for every application. They are suitable for different or stepped flow rates as well as for different maximum allowable operating pressures.HYDR-STAR pumps with two or three air drive sections reach the same final pressure as a HYDR-STAR pump with one air drive section with 1/2 or 1/3 of the air drive. Double-acting pumps increase the pump capacity by around 50% in comparison to single-acting pumps and reduce the pulsation equally.Product Features☆ Up to 100,000 psi (7000 bar) capability. ☆ Infinitely variable cycling speed.☆Stall feature at pre-determined pressure to hold that pressure without   consuming power .☆Easily automated, with many modification and control options available.☆ Suitable for most liquids and liquefied gases.☆ Can be manufactured to meet CE, ATEX and NACE.☆Robust, reliable, compact and easy to maintain proven design.☆ Unbalanced cycling spool provides immediate response to pressure changes.☆Also available in standard, Configuration required by customer.☆No need for air-line lubrication, which saves costs and prevents contamination.  Product Application☆ Pressure testing☆ Jacking and Lifting☆ Valve actuator control☆ Hydraulic cylinder actuation☆ Roller tensioning☆ Precision lubrication and spraying☆ Work holding and power clamping☆ Liquefied gas transfer☆ Machine tools☆ Well Control PanelOur AdvantagesEasy handling 1. Initial operationThe pump is prepared for operation manually:☆ Connect supply lines (compressed air, suction and pressure lines).☆ Set air drive pressure.☆ Open compressed air supply slowly so that the high-pressure pump starts up .2. Build up pressureThe pump technology executes all the steps for pressure build-up automatically: ☆ Automatic cycling of 4/2-way valve (spool cycling valve) by means of air pulses from the pilot valve (2/2-way valve)☆ Suction of medium.☆ Optimum cycling conditions thanks to large cross-sections .3. Achieve and hold pressureThe pump controls the processes of reaching and holding pressure.☆ Pump automatically stops operating when the operating pressure is reached due to equilibrium of forces☆ Pressure is held.☆ Pressure holding phase with no energy consumption or heat generation .☆ Pump restarted automatically if operating pressure drops. Company ProfileFormed by the technical team with at least 15-year experience in high-pressure technology and fluid control, HYDR-STAR Fluid Control Company Limited has long been regarded as the leading manufacturer in China for pneumatic driven liquid pumps&gas boosters and high pressure(up to 100,000psi) valves. With the growing acceptance from foreign customers on its pumps and valves application experience, HYDR-STAR is accumulating the reputatio