Liquid Ring Rotary Vane Vacuum Pump High Pressure Water Pump

  PROFESSIONAL MANUFACTURE-- SINCE 19952BEC liquid ring rotary vane vacuum pump High Pressure Water PumpThe water ring pump was originally used as a self-priming water pump, and then gradually used in many industrial sectors such as petroleum, chemical industry, machinery, mining, light industry, medicine and food. In many processes of industrial production, such as vacuum filtration, vacuum water diversion, vacuum feeding, vacuum evaporation, vacuum concentration, vacuum rehydration and vacuum degassing, water ring pumps are widely used. Due to the rapid development of vacuum application technology, water ring pumps have always been valued in terms of obtaining rough vacuum. Because the gas compression in the water ring pump is isothermal, it can pump flammable and explosive gases, and also dust and water-containing gases. Therefore, the application of water ring pumps is increasing.Product Description The 2BEC type water ring vacuum pump and compressor are not only high efficiency and energy saving, but also very suitable for long-term, continuous operation.Operating under rough vacuum, the working conditions of liquid ring pumps are often extremely harsh. The 2BEC water ring vacuum pump has been designed to fully consider that it must be able to pump all kinds of gases. It has been widely used in papermaking, coal mines, power plants, vacuum filtration, chemical, petrochemical, food processing and other industries.2BEC type water ring vacuum pump can be used with a variety of driving devices, such as belt drive, gearbox, synchronous motor, frequency converter, etc. In addition, in order to save space, a series operation mode driven by one motor can also be adopted, and up to four pumps can be operated in series at the same time.When equipped with a middle partition, the left and right parts of the 2BEC water ring vacuum pump can operate at different vacuum degrees. As long as the suction pressure difference between the two parts is less than 80kPa, a 2BEC water ring vacuum pump can be used as two independent vacuum pumps. This feature further improves the operating flexibility of the 2BEC water ring vacuum pump.Product Parameters   ModelSpeedMax.PowerMotor PowerAspirating VolumeMin. hpaWeightr/minKWKWm3/hm3/minmbarKG2BEC 400 34082110485080.8160327539095110565094.24401151326250104.249013416069001155301481857470124.55701672008000133.36101892208600143.32BEC 420 3401081326650110.816037203901321607650127.54401571858550142.54901802009400156.653020422010150169.257022925010700178.361026031511600193.32BEC 500 2601421608700145160611030017120010150169.23402032501140019038023828012700211.74202773151380023047033840015500258.32BEC 520 26017220010700178.316067403002102501230020534024528014000233.338028831515400256.74203374001680028047041250018700311.72BEC 600 23020525012700211.716091002602432801440024029028531516000266.732032235517500291.735036545019000316.7400465560216003602BEC 620 230250280156002601601070026030035517700295290340400195003253203904502130035535045050023200386.740057063026200436.72BEC 67021028031518300305160127002403504002040034027041545023160386300465560255004253205236302700045033054563027720462370670800309605162BEC 72019034540021900365160157002103954502430040524047556027480458270550630305405093006427103378056334079590038100635Features: 1. There are large inspection ports on both sides of the pump cover, which can be used to check gaps, corrosion conditions and fouling. 2. The 2BEC water ring vacuum pump is prepared with suction and exhaust flanges on the top and side at the same time, and they have the same caliber, so the on-site installation is more flexible and convenient. 3. The bearings are all imported original bearings, which ensure the precise positioning of the impeller of the 2BEC water ring vacuum pump and the high stability during operation. 4. The impeller is made of nodular cast iron or welded by steel or stainless steel plates, which fully guarantees the stability of the 2BEC vacuum pump impeller under various harsh working conditions and greatly improves the service life of the 2BEC water ring vacuum pump. 5. The pump body is all made of steel plate or stainless steel plate, which improves the service life of the 2BEC water ring vacuum pump. 6. The shaft sleeve of the 2BEC water ring vacuum pump is the most vulnerable part. The company uses all stainless steel to make it, and its life span is 5 times longer than that of ordinary materials. 7. The pulley (belt drive) adopts a standard high-precision tapered pulley, which is reliable in operation, long in belt life and easy to disassemble. 8. The unique top-mounted gas-water separator saves space and effectively reduces noise. 9. All castings are made of resin sand with good surface quality. The surface of the casting does not need to be greasy, so that the 2BEC water ring vacuum pump has the best heat dissipation effect. 10.The mechanical seals (optional parts) are all imported parts to fully ensure that the 2BEC water ring vacuum pump h