Hydraulic Submersible Slurry Pump for Medical and Chemical Industry

Product Description1)YZ Model Submersible Slurry Pump is a vertical but only suction cantilever centrifugal pump structure. The impeller is a semi-opened vane, and stirring blades are provided at the extension of the suction side of the impeller.Two series of pumps are mainly used in environmental protection, municipal engineering, thermal power plants, gas coking plants, oil refineries, steel mills, mining, paper industry, cement factory, food factory, printing and dyeing industries to suck thick liquid, heavy oil, oil residue, dirty liquid, mud, mortar, sand and urban sewage drains flowing sludge, as well as liquid containing coal ash slag. Can also be used as a chemical, pharmaceutical and other industries suction containing mud and sand slag fluid and corrosive liquid.2) Model significance80 YZ 80 - 20AYZ- Submersible Slurry Pump (mortar pump)80 pump outlet diameter (mm)80- pump design point flow (m3/h)20 pump design head (m)A - indicates that the impeller has been cut for the first time3) The transmission mode of the pump: the pump is connected with the motor through the elastic coupling, and the pump rotates clockwise from the direction of the prime moverYZ pump is a single counter-level, single suction cantilever structure, with bearing seat, supporting seat, connecting pipe connected hydraulic parts of the pump, the liquid is discharged from the liquid pipe components, the impeller of the pump is a semi-opened impeller, impeller blade inlet extension is provided with mixing blades, the main characteristics of the pump is in the liquid part of the pump shaft, there is enough stiffness, impeller, pump shell between the bearing, do not use shaft seal, A medium containing a larger concentration of fixed particles can be transported. The length of the pump under the liquid insertion is between 800-2000, with suction pipe if necessary. The shaft seal uses a larger pump inserted into the liquid operation, without shaft seal, transmission by a vertical motor installed on the motor support and support seat, with a coupling connected to the pump.1. From the motor to the pump end, the pump is counterclockwise.2. The pump adopts long shaft structure, the insertion depth can reach 10 meters, the shaft connection structure is safe and reliable, and the disassembly is convenient.3. When the pump starts, the impeller is immersed in the medium, so it is easy to start, and there is no problem of exhaust pumping.4. Rotor parts can be axial adjustment, and the use of multi-point support, stable and reliable pump operation, can be used to lengthen the suction pipe, increase the insertion depth, make full use of their own suction process, the length of the rotor is shortened, rigidity is enhanced, life is prolonged, economic and reasonable.5. Sliding bearing can choose external cooling lubrication or self-cooling lubrication.6. The outlet flange is divided into half movable flange for easy connection.7. Equipped with low speed motor, low noise, stable operation, long service life.  Structure declarationYZ pump is a single counter-level, single suction cantilever structure, with bearing seat, supporting seat, connecting pipe connected hydraulic parts of the pump, the liquid is discharged from the liquid pipe components, the impeller of the pump is a semi-opened impeller, impeller blade inlet extension is provided with mixing blades, the main characteristics of the pump is in the liquid part of the pump shaft, there is enough stiffness, impeller, pump shell between the bearing, do not use shaft seal, A medium containing a larger concentration of fixed particles can be transported. The length of the pump under the liquid insertion is between 800-2000, with suction pipe if necessary. The shaft seal uses a larger pump inserted into the liquid operation, without shaft seal, transmission by a vertical motor installed on the motor support and support seat, with a coupling connected to the pump.Product Parameters  Flow capacityUp to 550m³/hHeadUp to 70mRotate speed1000-1500rpmEfficiency40%-80%Corrosion resistant alloyNoMarkCodeUsing medium1F30%CrMoCr30AIt is the ideal material with 35% solid content of corrosive media, such as benzene phosphate slurry, limestone gypsum slurry and other corrosive media.2Z3CNUD26.05N2605NComparable to CD4MCuN, about 30% solid content corrodes abrasive media, such as phosphoric acid filtrate, limestone gypsum grout, etc.300Cr25Ni7Mo3N2507Similar to CD4MCu, containing about 30% solid corrosion abrasive media, such as phosphoric acid filtrate, limestone gypsum slurry and other stations.400Cr22Ni5Mo3N2205Similar to CD4MCU, containing about 30% solid corrosion abrasive media, such as phosphoric acid filtrate, limestone gypsum slurry and other stations.5Z180C13DF2The abrasive medium containing 70% solid content is the ideal material for slurry pump and mud pump.6lCrl8Ni9304Dilute nitric acid, organic acid.700Crl8Ni9304LDilute nitric, phosphoric, organic acids.80Crl7Nil2Mo2316Dilute nitric, phosphoric, or