Horizontal Circulating Single-Stage Double-Suction Corrosion-Resist Chemical Centrifugal Sewage Pump for Chloride Evaporation Forced Circulating with ISO/CE

Product DescriptionHorizontal Single-stage Double-suction Corrosion-resist Energy-efficientChemical Centrifugal Sewage Pump for Chloride Evaporation Forced Circulating with Iso/Ce   Product standardGB/5657-1995;ISO9906-1999;GB/T13007-1991Product seriesKS-X, KS-XF, KS-XW, KS-XM type single-stage double suction four seriesApplication range and product featureKS-X type pump is a single-stage double-suction, horizontal open centrifugal pump for conveying clear water and liquids similar to water in physical and chemical properties, suitable for water supply and drainage in factories, mines, cities, power stations and circulating water stations, agricultural irrigation and water conservancy projects, the inner surface of the pump casing, impeller, shaft sleeve, sealing ring and other over-flow parts can be coated with Beltrona to further improve the pumping efficiency.KS-XF type pump is single-stage double-suction, horizontal open corrosion-resistant centrifugal pump, the parts in contact with the medium can be stainless steel, for conveying corrosive media or corrosive media with physical properties similar to water, suitable for chemical industry, petroleum, metallurgy, power station, food, synthetic fiber and other industries or municipal sewage treatment system.  KS-XW type pump is a single-stage double-suction, horizontal center-opening centrifugal sewage, slag slurry pump. The pump overflow channel has been redesigned, the flow channel is spacious and not easy to be blocked, for conveying sewage, slag mud slurry with fiber or other suspended matter, applicable to the main process of factories, mines, cities, power stations, food, paper, synthetic fibers and other industrial or municipal wastewater treatment system.KS-XM type pump is single-stage double-suction, horizontal open wear-resistant centrifugal pump, the pump impeller, shaft sleeve, sealing ring and other wear parts are made of wear-resistant materials or the inner surface of the pump casing and the surface of the pump over-flow parts are made of special wear-resistant spraying, which can effectively prolong the service life of the parts, and it is suitable for the occasions of chemical factories, mines, power stations, water conservancy, farmland irrigation and so on, where the conveying medium contains mud and sand or there are crystallized materials. Design point performance parameters and external dimensions are exactly the same as KS-X type, supplying caliber from φ250-φ800.Series of pumps product model notes  The outer wheel is cut by the firstNominal head is 65m KS-X double suction clear water centrifugal pumpsKS-XF double suction corrosion resistant centrifugal pumpsKS-XW double suction sewage, slurry, mud pumpsKS-XM double suction wear-resistant centrifugal pumpsPump inlet diameter of 250mmPerformance parameters of the tableCompany Profile         Our AdvantagesWhy Choose Junfu Pump) Excellent quality, competitive price, prompt delivery, on-time service and good reputation.) Low minimum order) We offer knowledgeable tech support before and after the sale.) We pass the authentication of ISO,API,CE.Service Policy         Junfu's Warranty Policy are provided by Jiangsu Kangqiao Electromechanical Equipment Technology Co., Ltd and cover defects in workmanship and materials.          The goods provided by the seller must ensure that they fully comply with the requirements of the contract and are suitable for the intended use in design and construction; Must meet or exceed all performance values and tolerances; The goods must be tested in accordance with the provisions of the contract and its attachments to demonstrate their ability and compliance with the technical specifications and performance data. If the goods or any part thereof cannot comply with the provisions of the contract, the seller must remedy the defect and/or inspect and retest the goods for the buyer free of charge, without any financial restrictions, and must complete the work within the time agreed upon by both parties. If the goods cannot be remedied or corrected, the buyer has the right to reject the goods. In this case, the seller must replace the rejected goods or replace them with suitable goods to meet the requirements of the contract. The replacement work must be completed within the delivery time that cannot exceed the originally agreed contract delivery date. The seller must implement an effective quality assurance system during the organizational process, which has the same requirements as those specified in the IS09000 series 2000 edition. The products provided must comply with the requirements of the HSE management system standard, which is 0SHA180001/HSEo The warranty period for the 4 pumps is 18 months from the date of shipment or 12 months after operation. During this period, if any manufacturing quality issues occur, the supplier will replace the parts free of charge. If any pump malfunctions occur due to the buyer's reasons, the supplier will also provide tim