Stainless Steel Ammonia Evaporative Condenser for Cold Room Compressor System

Refrigerant Evaporative Condenser 1. HEAT-EXCHANGE COIL• A variety of coil materials are available: SS304, SS316,HDG• Continuous serpentine shape, consists of outlet headers, support, and inlet & outlet piping.• Various coil sizes are available: Diameter 16-32mm, Wall thickness 1.5-3.0mm. Design pressure from 2.0 to 20mpa2. DRIFT ELIMINATOR• Evapco Type• Drift rate less than 0.002%.• Wave-formed self-extinguishing CPVC 3. COLDWATER BASIN• The cold water basin includes a basin pan, a drain-out connection, a steel strainer, make-up valve, and overflow connection.• One Slop-designed concave pan with a suitable size drain-out connection.• One steel strainer with perforated openings and an anti-vortexing hood. 4. AXIAL FAN• Direct drive axial Fan, angle index can be adjusted if needed.• Siemens / WEG Brand motor, protection class IP55/IP56, insulation class F. Explosion-proof motor available5. SPRAY WATER DISTRIBUTION SYSTEM• Oneself-balance buffer chamber.• PVC water distribution branches.• ABS Large orifice and 360 non-clog nozzles. 6. PUMP• Close-coupled centrifugal pump equipped with a mechanical seal• Siemens/WEG motor, protection IP55/IP56, insulation class F.  One of the strategies that we can use to improve performance is evaporative condensation, which use is increasing in modern refrigeration systems.Using this technology, we are able to reduce the condensing temperature. If the condensation temperature of a refrigerant circuit decreases, the condensation pressure of the refrigerant also decreases.  As a consequence of this, the electrical power of the compressor required decreases, since the pressure difference is smaller in the compressor,  and therefore less power is necessary to achieve that pressure increase.For more details, please send enquiry to me to discuss more!  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1