Industrial Dibasic Aluminum Sulfite Spin Flash Dryer Price

Spin Flash DryerProduct Description  The flash dryer is widely used in the dispersion and drying of granular, powdery, paste-like, and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of the small occupied areas, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiency and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.  XSG series rotary flash drying machine is my factory in the introduction, absorption, on the basis of foreign advanced technology, successfully developed a new type of drying equipment. This advanced technology, reasonable design, compact structure, wide scope of application, large production capacity, products of good quality and high efficiency, energy-saving, in dry equipment, crushing, sieving one-time completed, eliminate the pollution of the environment, the whole machine performance reached the international advanced technology level.Working Principle  The flash dryer consists of a dry main engine, feeder, heat source device (hot air furnace or steam), air filter, air blower, cyclone separator, bag filter, and induced draft fan. The hot air tangentially enters the bottom of the dryer and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer by the screw feeder. Under the strong action of the high-speed rotating stirring paddle, the material is dispersed under the action of impact, friction, and shearing force, the block material is rapidly pulverized, and it is fully contacted with hot air and heated, and dry. The dehydrated dry material rises with the hot gas flow, and the classification ring intercepts the large particles. The small particles are discharged from the center of the ring to the outside of the dryer and are recovered by the cyclone separator and the dust collector. The dry material is not dried or the bulk material is subjected to centrifugal force, fell to the bottom, and was crushed and dried.Our Advantages1.  XSG rotating flash drying machine is equipped with a special cooling device at the bottom, thus avoiding material deterioration due to high temperature.2.  Wind distribution devices can reduce the resistance to drying equipment and provide air volume for the dryer.3.  This rotary flash dryer uses a particular pressurized sealing device and bearing cooling device to effectively prolong the service life of the drive part.4.  Material fineness and final moisture content can be adjustable.5.  Short staying time of material can prevent the material from sticking to the wall and the thermosensitive material from deteriorating.ApplicationsXSG rotating flash drying machine is applicable to dry viscous, thixotropic, thermosensitive powdery, and granular materials in the dyes, pigment, chemical, ceramics, food, and pharmaceutical industry. The appropriate materials can be dried by this drying equipment include:  Foodstuffs: soy protein, gelatinized starch, wine trough, wheat sugar, wheat starch, etc.  Organics: Atrazine (pesticide pesticides), lauric acid, benzoic acid, benzoic acid, bactericidal dan, sodium oxalate, cellulose acetate, organic pigments, and the like.  Dyes: antimony, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various nitrogen dye intermediate. Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, and the like.Product ParametersModelInner Diameter(mm)Air Volume(m³/h)Evaporation Capacity(kg/h)Total Power(kw)Max Height(m)Covering Area (m²)XSG-2200350-50012-1710415XSG-44001150-200040-70204.820XSG-66002450-450080-150405.828XSG-88004450-7550150-250656.535XSG-1010007000-12500230-425857.140XSG-12120010000-20000300-6001057.852XSG-16160018000-36000600-10001508.880XSG-20200028200-565001000-150023010.1150  Note:  1. The evaporation of water is the water that evaporates every hour when the inlet air temperature is 180 °C and the outlet air temperature is 80 °C.  2. In addition to the above models, special design and customization can be made for users.  3. The above-installed capacity is standard, and the materials have different powers.Company Pr