Biomass Woodchips Vinasse Coconut Shell Forage Grass Alfalfa Straw Olive Pomace Sawdust Rotary Dryer

Biomass Woodchips distillers grains sugarcane peanut coconut shell alfalfa forage grass Cassava Dregs Straw Olive Pomace Sawdust Rotary Dryer  Rotary dryer is widely used for drying slag limestone, coal powder, slag, clay, etc.Dryer can also be used in building materials,metallurgy, chemical and cement industry. Rotary Dryer mainly consists of dryer body,raw material feeding plate, driving and supporting device, seal ring, etc. Dryer can be generally divided into four types, they are: rotary dryer, triple-drum dryer,indirect heat transfer dryer, vertical dryer.Different kind of dryer has its own characters and advantages, the specific choice of a special dryer depends on different elements. Model Gradient(%) Rotating Speed(r/min) Power(kw) Output(t/h) Air inlet temperature(°C) Weight(kg) 0.6×6 3-5 3-8 3 0.1-0.2 ≤220 1700 0.8×8 3-5 3-8 4 0.3-0.4 ≤220 2500 0.8×10 3-5 3-8 4 0.5-0.7 ≤220 3000 1.0×10 3-5 3-8 5.5 0.9-1.1 ≤220 3500 1.2×10 3-5 3-8 7.5 1.3-1.5 ≤220 4500 1.2×12 3-5 3-8 11 1.5-1.7 ≤220 5300 1.5×12 3-5 3-8 15 2.0-2.5 ≤220 7500 1.8×12 3-5 3-8 18 3.0-3.5 ≤220 10000 Rotary Dryer Application  Hengchang Rotary Dryer is widely used in the field of build materials,metallurgies,chemical industry, cement and so on. (1)Our dryers can dry slag, coal powder, mining powder, clay, sand, limestone,chicken manure,sludge,slurry,sawdust and so on. (2)Powder & particle: Sands, limestone, stones, clay, mineral filter cake, coal, iron sulphate, filter cakes, fly ash, gypsum etc. (3)Damp and sticky material: Coal slime, sewage sludge, bentonite, Kaolin etc. (4)Corrosive material: Distillers 'grains,Fertilizer, animal dung, slag etc. (5)Biomass material: Sawdust, wood chips etc.Drying Effect  Biomass dryer is an environmentally friendly drying equipment! 1.The processing output is high, the biomass slime dryer can process a large amount of coal materials every day, it can be produced continuously, and the work efficiency is high.2.The drying effect is good and the drying degree is uniform. The material dried by the biomass dryer has a good color and a uniform drying degree.Rotary dryer features  1.The motorization level of the barrel is high, and the production capacity is high. 2.The resistance that the material passes through the barrel is less, and the power consumption is low. 3.Application capability to different characters of materials is high. 4.The operation is stable, the operation fee is low, and the uniformity of product drying is good.Detailed Images  Point 1-Steel Plate SelectionChemical analysis was carried out on the material inspection, according to the requirements of GB700-2006, dryer drum thickness < = 20 mm we use Q245 - A, > 20 mm we use Q245 - B; According to the GB/T 2970-2004 class ii, the range of 60 mm weld edge every board before cutting for ultrasonic flaw detection.  Point 2-Dryer Drum WeldingThe dryer cylinder section for toroidal welding, longitudinal along the entire circumference of not more than two weld article number, and shell welds shall be full, the minimum is not lower than the parent metal surface, the top should not be higher than 3 mm, feed plate weld should be smooth.Weld edge bite depth should not be greater than 0.5 mm, continuous length should not be greater than 100 mm, should not exceed the total length of each weld bite edge which 10% of the weld length.  Point 3-nspectionExamination all the parts according to the drawing after processing completion. Spraying primer, rust preventing paint, and heat resistance paint.  Working Principle  1.The material first goes into the inside drum, because there are the spiral shape boards fixed in the drum, when the dryer make rotary working, the spiral shape board will stir the material and make the material do movement.2.When the material reaches the right side of the drum, it will go into the second drum for further drying.3.The same working principle, the material then goes into outside drum, during the drying working process, the material will make three times drying, so the material can be dried completely in this process.   Company Information  Hengchang headquarters is located in the industrial park in Gongyi City. It covers a total area of 150,000 square meters,including 100,000 square meters of standarized workshop.There are more than 200 sets of various large and medium-sized metal processing lathe, riveting machine, welding equipment and assembly equipment. We have more than 300 workers, including more than 20 middle and senior technicians. Hengchang is mainly focus on 4 series products: stone crusher machines, sand making equipment,powder grinding mills, mineral processing equipment and their spare parts. Every year, Hengchang can turn out 1,000 sets of crushers and 10,000 tons of crusher parts.Customer Visit & Our Service(A) Pre-sale services:Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments. 1.Select e