Theta Cold Mounting Machine for Acrylic or Epoxy Resin Mounting Metallography

Product Description- The cabinet material is Makrolon Polycarbonate. The containers that are under pressure are made of INOX (oxidation resistant) steel- Technomat pressure pot is particularly suitable for resin fast curing system while maintaining resin physical and chemical properties which are completely unaffected- Technomat ensures that curing resin is free of air bubbles and made into a high quality sample (for curing system such as TJ 2210)- There is no unpleasant odor in the polymerization processThetaMount cold Press is designed with compact pressure technology. It can reach a maximum pressure of 2 bar, ensures that cold inlay patterns are free of air bubbles during the curing process. This machine ensures rapid curing of the cold mounting resin without affecting the physical and chemical properties of the cold mounting resin and curing agent mixture.So it can be used for rapid curing of all cold mounting resins (Especially for TJ-2210 acrylic resin) and making high quality specimens.Technical Parameters- Pressure Load: 2.0 bar- Safety Valve:2.8-3.3 bar- Dimension:340*340*255mm- Weight: 4.0kgModelThetaMountOperating Pressure2.0barSafety Valve Overflow Pressure 2.8~3.3barAir Source3~10barChamber diameterΦ235×170mmDimension WXDXH308×415×289mm (Closed);308×415×342mm(Open)Weight8.5kgTIPS:    Epoxy and Acrylic castable mounting systems are recommended for mounting specimens that are sensitive to high pressures and temperatures.Epoxy mounting systems provide good physical adherence, low shrinkage and excellent infiltration into pores and cracks.Acrylic mounting systems are typically selected for their short cure times.Dyes and fillers can be added to either system.  Dyes can enhance pores and highlight the interface between the media and sample. Conductive fillers allow epoxy mounting systems to be used in an SEM without additional processing.Fillers can improve the abrasion resistance of all castable systems. Tips, Tricks & Techniques: • To get the best results, use a vacuum system to evaucate air trapped in epoxy systems and samples.  This reduces or elimates the gap at the sample/epoxy interace, fills pores in the specimen with epoxy and enhances the end result.  • To improve edge retention for acrylic systems, coat the sample in the liquid hardener before pouring in mixed compound. CertificationsCompany ProfilePayment & ShipingRFQ1, Min. Order Quantity1 piece is OK.2. How about your technical team construction?We have professional technicians team with 10 years' experience.3, What's our warranty?12 months4, Ways of paymentT/T, L/C, Pay pal, Western Union5, Ways of shipmentEXW, FOB, DHL, FedEx, or upon your requirements6, Are you a trader or manufacture?We are manufacturer, owns our factory in Suzhou.7, Can you accept OEM or ODM?Of course,Logo is also acceptable8, What is the delivery time?No special requirements, can be delivered within 3 days. For customized models, delivery time shall be discussed and confirmed according to orderContact  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1