Pure-Air Welding Fume Extractor with 2400m3/H Air Flow

Pure-Air Welding Fume Extractor with 2400m3/h air flow (MP-2400SA)1.  Application:Pure-Air MP-2400SA welding fume extractor suitable for air purification, fume filtration for different welding processing, including below welding processing, also has very good peformance for Dust collection and fume filtration for laser cutting metal, plasma cutting, polishing and small workpeiece metal grinding, etc;            1) Argon arc welding;                                                                                          2) Electric-arc welding;                                                                                       3) Carbon-dioxide arc welding;                                                                                 4) Electric slag pressure welding;                                                                            5) Oxygen-acetylene Gas Welding;                                                                              6) Flash butt welding ultrasonic welding;                                                                                7) Other Welding Process.2. Specification Sheet:Equipment DataItemTechnical DataRemarkMP-2400SACarbon steel painting machineMain components including: high temperature resistance vacuum hose, imported materials HEPA PTFE Cartridge Filter, dust drawer, casters with the brake, fans, motors and electronic control box, exhaust arm.Dust Cleaning WayAutomatic blowback cleaning systemUsing automatic cleaning system, installed the differential pressure monitoring device in front of filter and back the filter, when the filter pressure to reach the specified value, to connect air compressor, start the automatic anti-blowing system and doing high pressure blow back from inside of filter.Fume & dust inlet150mmSingle Air inlets, include 1pc exhaust arm  φ150mm*3000mm(L)Fresh air outlet150mmShutter holesMachine weight105KG (N.W.)Machine with all elementsMachine Dimension500*780*1350mmMachine sizePackage dimension600*880*1500mmPacked by plywood crate Blower Technical DataItemTechnical DataRemarkRunning periodmore than 30,000hOne year guaranteeMax. air flow2400m³/hElectronic speed controlInput capacity2.2KWLow capacityFiltration Area15m2High filtration rateRunning sound≤70dBALow sound volumeInput power380V,50HZInternational standard Cartridge Filter Elements DataItemTechnical DataRemarkCartridge FilterH13 class HEPA PTFE cartridge FilterHigh efficiency film filterFilter qty1pcFilter cartridge size φ325*550MMExhaust Arm1pcSuck the welding fumesAverage filtration rate≥99.9%It will be a little fluctuation according to different materials.3. Product DescriptionPure-Air MP-2400SA Welding fume extractor suitable for fume filtration and dust collection for different welding process. Also has very good peformance for Dust collection and fume filtration for laser cutting metal, plasma cutting, polishing and small workpeiece metal grinding, etc; MP-2400SA Air flow is 2400m3/h, blower capacity is 2200W. Filter cleaning type: Automatic blowback cleaning system.Our welding fume extractor use special and high quality fans and motors to prevent the motor burned anti-overload circuit, high security, stable performance, high filtration performance,nice quality, easily move. It included H13 class HEPA PTFE Cartridge Filter to ensure filtrate harmful material of the fumes/dust completely, to achieve room air quality standard, protect environment and people's health;MP-2400SA welding fume extractor using automatic cleaning system, installed the differential pressure monitoring device in front of filter and back the filter, when the filter pressure to reach the specified value, to connect air compressor, start the automatic anti-blowing system and doing high pressure blow back from inside of filter.The deposition dust on the filter surface will be blowing to the dust drawer, so that the filter surface becomes clean. The equipment needs to be connected to compressed air, so customers need prepare their own air compressor. Air compressor connect by high pressure hose, it intake by high pressure from the bottom, to ensure the dust collector always in good working condition.                                                                     4.  Working principle:Through the wind force of the fan, the dust is sucked into the air inlet of the equipment through the suction hose, then the dust is blocked at the air inlet, the large dust is blocked to the dust drawer. Small dust enter into the settlement room, take use of gravity and the upstream air, firstly make the coarse dust directly drop to the ash bucket, small dust particles were trapped in the outer surface of the filter. Clean air will be filtrate by HEPA PTFE Cartridge Filter, then enter into the clean room, exhaust outside after the outlet by the standard discharge;5. More Products (visit our website: fumeextractor.en.made-in-china.com)Laser Fume Extractor  / Soldering Fume Extractor / Welding Fume Extractor / Metalworki