Roller Conveyor Type Shot Blasting Machine for Aluminum Profile Surface Cleaning Abrator

QAS90-25 shot blasting machine for aluminum profilesProduct introductionSurface cleaning of aluminum profiles refers to the process of using a high-speed rotating impeller to throw steel grit (shot) on the surface of aluminum materials at a high speed and uniformity at a certain angle, and impact and scrape the surface of aluminum materials to form a uniform and fine sand surface. The profiles after shot blasting can effectively remove defects such as mechanical lines, welding lines, coarse grains, etc. Shot blasting technology combined with oxidation treatment technology can process surface profiles with different brightness and color, and stainless steel with different particle sizes and sizes can be selected. Pills, aluminum pills, brown corundum, quartz sand, etc. are processed into different rough and fine metal senses.Aluminum profile surface cleaning has the following advantages:1.Optimize the surface process state of the aluminum material, improve the corrosion resistance of the aluminum profile, improve the fatigue resistance of the aluminum material, and prolong its service life.2.Compared with chemical treatment methods, the requirements for aluminum materials are wider, which can greatly improve the sand surface treatment efficiency and treatment quality.3.Reduce the waste of resources and reduce the labor intensity of sand surface treatment.4.Reduce environmental pollution.5.This series of products can also carry out deep processing of glass, aluminum plate, stainless steel plate and plastic plate.This machine is generally used in the production of aluminum profiles and the deep processing industry of aluminum profiles to improve the appearance quality and surface corrosion resistance of its products.The aluminum profile shot blasting machine is mainly composed of a shot blasting host, a hoist, a feeding table, a discharging table, a sand pouring table, a dust removal system and an electric control cabinet.There are 4 impeller and feeding transmission devices installed on the main machine, which are controlled by the frequency converter.The discharge table and the sand pouring table are connected by an automatic feeding frame, which is used to complete the discharge and send it to the sand pouring table.Dust removal systems can take two forms:1.Two-stage cyclone dust removal + water bath dust removal device has excellent dust removal effect, and the exhaust gas discharge meets environmental protection requirements.2.First-class cyclone dust collector + filter cartridge dust collector, and equipped with automatic dust cleaning, explosion-proof, explosion-discharging, fire-extinguishing and other protection devices, the dust removal effect is excellent, and the exhaust gas discharge meets the environmental protection requirements.The equipment is equipped with four shot blasting machines, all of which are independent frequency conversion speed regulation, which are suitable for shot blasting requirements of various profiles, and the treatment effect is the same as that of the imported machine. High work efficiency, the machine is controlled by PLC program, and can automatically complete the shot blasting of profiles. This equipment has automatic feeding of the discharge table, automatic sand pouring device, the feeding interval is shortened to 5 seconds, and the operation is simple, only need to place the aluminum profiles on the feeding table side by side and move them back to the material rack from the sand pouring table That's it.The equipment is equipped with an efficient and high-quality dust removal system. Users can choose a dust removal form according to local environmental      protection requirements:1.Two-stage cyclone dust removal + water bath dust removal device, the first-stage cyclone dust removal collects the particles with larger particle size into the dust collector, and the dust smaller than 0.02mm enters the water bath type dust collector for filtration and removal, so that the exhaust gas can meet the environmental emission requirements, and the in and out of the machine There is no dust overflow from the material inlet, and the working environment of the workshop is clean and comfortable. Low maintenance cost and long service life.2.First-class cyclone dust collector + filter cartridge dust collector, and equipped with automatic dust removal, explosion-proof, explosion-unloading, fire-extinguishing and other protection devices. Under normal operation, the dust-laden airflow generated by the shot blasting machine will enter the first-stage cyclone dust removal through the connecting pipe, and the particles with larger particle size will be collected into the dust collecting cylinder, and the dust smaller than 0.02mm will enter the filter cartridge dust collector; The air flow of small particles of dust is filtered by the filter cartridge of the dust collector, and then drawn into the chimney through the centrifugal fan and discharged to the high altitude. The filter cartridge