Bwro Reverse Osmosis Membrane 8040 as Water Purifier for Filter System

UltraClean XLE series reverse osmosis membranes change the surface properties and chemical properties of the membrane by changing the formulation and production process conditions of the bottom membrane and composite membrane, improving the specific surface area and hydrophilicity, and maximizing the membrane flux. It is suitable for municipal water treatment. It is one of the reverse osmosis membrane elements with the highest water production and the lowest operating pressure in the membrane industry. The total cost of assembling the system with this element is the lowest, which can greatly improve the operating economy of the reverse osmosis system. as the most. A new generation of ultra-low energy consumption and high-performance reverse osmosis membrane elements, its operating pressure is about 1/2 that of ordinary brackish water reverse osmosis membrane elements, and the desalination rate can reach 99%. The ultra-low energy series is available in 8-inch and 4-inch sizes.Product  Highlights1.Has very high water flux and very low operating pressure2.It can greatly reduce the energy consumption of the membrane system, while taking into account the desalination rateMembrane Specification  A inch(mm)B inch(mm)C inch(mm)40 (1016)1.125 (29)7.9 (201)Performance Specification  Effective Membrane Areaft²(m²)Stablized RejectionRate(%)Minimum Rejectionrate(%)Fluxgpd(m³/d)400 (37)99.098.011500 (44)Test conditions: inlet pressure 0.69 MPa (100 psi); inlet temperature 25°C (77°F); inlet water quality 500ppm NaCl; inlet pH 8; recovery 15%.Operating and Cleaning Limits  Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)Maximum operating pressure                                                                                                                                      600 psi (41 bar)Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)pH rangeContinuous operation                                                                                                                                                                              2 - 11Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13Maximum Influent Sludge Density Index SDI                                                                                                                                             5Free chlorine tolerance                                                                                                                                                                   < 0.1 ppmPermeate flow for individual elements may vary ±15 percent from the value specifed.Active membrane area guaranteed ±4%.Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.Production LineAbout UsWhy Choose UltraClean/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1