Cheap Factory Centrifugal Food Vegetable Fruit Dewater Deoil Machine Fried Potato Chips Oil Water Separator Separating Machine

Basic Info.Model NO.JHYTS-87After-sales Service1yearWarranty1yearTypeDryerVoltage380VPower1.5KWCustomizedCustomizedMaterial of Complete MachineSUS304Production Cycle5daysTrademarkChangheTransport PackageWooden BoxSpecificationJHYT-600-800-1000OriginChinaHS Code8210000000Product DescriptionCheap Factory centrifugal food vegetable fruit dewater deoil machine fried potato chips oil water separator separating machineModelDimension(mm)Weight(kg)Power(kw)Capacity(kg/h)JHYTS-4001050*510*7103701.1200-340JHYTS-5001100*620*7603901.5350-450JHYTS-6001220*720*7604302.2450-550JHYTS-8001420*920*8154903650-800 Product DescriptionThe variable frequency vegetable dehydrator is suitable for removing surface moisture of various vegetable products, and is an ideal processing equipment for dehydrated vegetables in the vegetable processing industry. Based on the technical parameters required for vegetable processing materials, the machine uses frequency conversion technology and photoelectric sensor technology to realize the control of working time, working speed, start and stop; It is characterized by safe and reliable operation, simple operation and low noise.Detailed Photos Installation Instructions Working principle: put the materials into the sieve basket evenly and evenly, put them into the rotating cage, close the upper cover, and the machine will automatically start up and work. The centrifugal force of the rotating cage will make the moisture of the materials in the basket throw out of the basket and be discharged by the drain.Customer site1 Place the machine on a solid, dry and ventilated level ground to ensure that the machine works stably and reliably.2 Check whether there are foreign matters in the basket and rotating cage and clean them to avoid damaging the machine during operation.3. The voltage used by this machine is 220V~, and confirm that the power supply voltage is consistent with the voltage used by this machine; The power switch shall be installed outside the machine body before entering the line.4. Extend the power cord, reliably ground the core with grounding symbol, and connect the other twoThe wire core is respectively connected to the full-stage disconnection large-distance power switch; The incoming and outgoing parts of the power line and the machine shall be fixed and sealed to prevent water leakage and electric leakage.5 Check the photoelectric control probe at the rear of the machine cover. The correct position is to align with the through-hole of the follower disc on the left side of the cover hinge. The distance between the follower disc and the through-hole is 5-7 mm. Check that there is no error. Close the power switch and the upper cover for no-load test run. The test run can only be carried out if there is no abnormality at all parts.6. The machine shall not have shock vibration or abnormal sound during the no-load test run, otherwise, the upper cover shall be opened, the machine shall be shut down and the power supply shall be cut off for inspection, and the machine can only be operated after the fault is eliminated.7 Before work, connect the drain to the drain pipe or align it with the drain hole on the ground.8. The operating speed and working time of the machine have been preset before leaving the factory. The operating speed is preset to 800 rpm, and the time for running a working cycle is preset to 1 min (60 seconds). The user can make necessary adjustments according to the use situation and requirements, but should not exceed the maximum rated speed of the main shaft of 1200 rpm. Packaging & Shipping  Matching equipment   Company ProfileZhucheng Changhe Machinery Technology Co., Ltd. is a high-tech machinery enterprise specializing in R&D, production, operation and sales. The company has strong technical force and a perfect, complete and scientific quality management system. It has its own scientific research team, production team, sales team and after-sales service team, specializing in the production of pig, cattle and sheep slaughtering equipment, by-product processing equipment, cooking equipment, vacuum packaging machine, rolling vacuum packaging machine, cleaning and air drying equipment, pasteurization line, drying line, smoking stove, frying line and other assembly line equipment. Changhe has strong technical force, high-precision processing equipment and professional sales service system. In recent years, it has been widely praised by domestic users. The company insists on serving customers with high and new technology, and wins the trust of users with superior product quality. Facing the fierce competition in the market, we always adhere to the business philosophy of "quality first, customer first". On the basis of "100% quality and 100% service", the company has improved its after-sales service and strives to manufacture products with excellent quality to serve customers.FAQQ:Are you a trading company or a factory?A:We are a factory with more than 6 years of experience in f