8 Inch Bwro Reverse Osmosis Membrane as Water Purifier for Filter System

UltraClean FRLE series reverse osmosis membrane elements have extremely strong anti-fouling performance and low energy consumption performance. The membrane elements are developed for the treatment of low-quality feed water with a high tendency for biological or organic pollution. Its operating pressure is 30% lower than that of ordinary brackish water reverse osmosis membrane elements, the energy consumption is reduced by about 1/3, and the stable desalination rate can reach 99.3%. The anti-pollution low-energy series is available in 8-inch and 4-inch sizes.Product  Highlights1.It can effectively reduce the energy consumption of membrane system operation, and the system operation is economical.2.Good pollution resistance, high pollution influent water qualityMembrane Specification  A inch(mm)B inch(mm)C inch(mm)40 (1016)0.75 (19)3.9 (99)Performance Specification  Effective Membrane Areaft²(m²)Stablized RejectionRate(%)Minimum Rejectionrate(%)Fluxgpd(m³/d)400 (37)99.399.011500 (44)Test conditions: inlet pressure 1.03 MPa (150 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.Operating and Cleaning Limits  Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)Maximum operating pressure                                                                                                                                      600 psi (41 bar)Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)pH rangeContinuous operation                                                                                                                                                                              2 - 11Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13Maximum Influent Sludge Density Index SDI                                                                                                                                             5Free chlorine tolerance                                                                                                                                                                   < 0.1 ppmPermeate flow for individual elements may vary ±15 percent from the value specifed.Active membrane area guaranteed ±4%.Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.Production LineAbout UsWhy Choose UltraClean/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1