400-500m3/Hr Hydrocyclone Sand Separator for River Water Treatment

Introduction Cyclone sand separator is to separate the solid particles in the flowing liquid while swirling in the sand separator on the principle of screening and separation,which integrates the function of cyclone and filtering and show good effect in sand separating,turbidity reduction and solid-liquid separating.it is widely used in water source hot pump,water treatment,food-stuff,Pharmaceutical and other industry.also it is used in river water,sand separating for well water,coal washing water,mining water,liquid-solid separating,air exhausting and non-dissolved liquid separating.  Working principleCyclone sand separator makes use of centrifugal separating to remove sand,as the water inlet pipe is installed at the eccentric of the housing ,when the water flows into the cyclone sand separator  through water inlet pipe,first it flow through the tangent line around the housing to form a flowing obliquely downward.the flowing water will revolve and flow downwards,when the flowing liquid reach the circular cone it will swirl around the axis ,then it flows out of the sand separator ,the impurities and pollutant will fall off from the inside surface onto the sand bucket under the action of inertial centrifugal force and its own gravity,there is a structure at the bottom of circular cone to prevent the pollutant to be ascending,when the impurities accumulated in the bucket reach the max capacity,just needs to open the manual butterfly valve,the impurities will flow out of the cyclone sand separator under the action of flowing water. Product characteristics simple structure and operation,safe performance and no maintenance.Compared with enlarged pipe and baffle box sand separating equipment ,it is of small size,big capacity and occupation-saved.To remove the sand from water in continuous water supplying.It avoids secondary pollution with other sand separating equipment,also with high efficiency.technical parameter1.Influent turbidity ≤ 320 NTU2.output water turbidity0.8mmPrecautions for the use and installation of cyclone sand separator.1. The equipment should be installed in the form of bypass to meet the needs of overhauling the equipment and cleaning the filter body without stopping the machine.2. It is forbidden to turn on the device for a long time in an anhydrous state.Techanical parameters sheet    modelCapacity(m³/h)Input pressure(Mpa)Max partition diameter(mm)partition size(um)Desanding efficiencydimension (mm)Water Inlet (mm)Water outlet (mm)Sewage outfall  (mm)Weight (kg)      H1LH2    YLXC-25II 180.15-0.41.530-70>96%850273110025402540YLXC-40II 250.15-0.4240-100>96%1050273125040502550YLXC-50II 400.15-0.4340-100>96%1100273136050652560YLXC-80II 600.15-0.4340-100>96%115027314108010040120YLXC-100II 1000.15-0.4650-150>95%1200325145010012540130YLXC-125II 1600.15-0.41074-200>95%1250377150012515050180YLXC-150II 2000.15-0.41074-200>92%1350426160015020050240YLXC-200II 2500.15-0.41674-220>92%1450530170020025065350YLXC-250II 3000.15-0.41680-230>92%1550630180025030065400/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1