Wall Mounted Cold Storage Refrigeration Air Cooler Evaporator

* Product featureAdvanced heat exchange geometric structure and improved processing technology;To further reduce the heat exchange tube insideand outside thermal resistance and improve performance.The optimization of the heat exchange ; Meeting the demand of high space,long-range modern logistics refrigerator.A variety of material of heat exchange tubes and defrosting way;Meeting the demand of more widely used and lowest cost.* RefrigerantFreon,saline secondary refrigerant* Structure characteristics1.Different material of heat exchange tubes( $ 16),Antirust aluminum ,pure copper and efficient internal thread copper pipe.2.Different processing technology can meet the demand of different tube ,ensure the heat exchange efficiency.3.Continuous stamping of high toughness and whole corrugated antirust and hydrophilic membrane aluminum fin can improve the heat transfer coefficient and reliability.4.To meet the requirements of higher corrosion situation,we can also provide the heat exchange core which has overall nano coating protection.5.All the products must carry out 2.4MPa air strength test , 0.5MPa nitrogen pressure maintaining before delivery.* Accessories of axial fanlt is fixed by high efficiency and low energy consumption fan accessories and it has internal heat to protect the motor.Protection grade lP54,insulation grade F; the working condition: --40 ~+40(C).* DefrostingDefrosting :electrical heating, water spray and hot gas defrosting.Room temperature inside below -15 ºC, water pan has heat preservation processing, water outlet with electric heating device.Air guider is required for Cryogenic condition.* Liquid supply wayStandard product is directly expansion supply by liquid distributor.  Air Cooler Copper (aluminum) pipe aluminum fin Product parameter & Applicable conditions:ModelD45-145E/412F-T Evaporation area m² 143 Refrigerating capacity(kW) DT1=8Kevaporating temp. -8ºC 25.9 Refrigerating capacity(kW) DT1=7K evaporating temp. -25ºC 22.6 Tube volume (L) 59.14 Fan model (Voltage 400V,50Hz) Blade diameter(mm) 450 Fan model (Voltage 400V,50Hz) Power (kw) 0.54*4 Fan model (Voltage 400V,50Hz) Air flow (m³/h) 5800*4 Fan model (Voltage 400V,50Hz) Quantity 4 Fan model (Voltage 400V,50Hz) Noise (dB) 75 Electric defrosting(Voltage 220V) Cooling coil (kW) 2.9*6 Electric defrosting(Voltage 220V) Defrosting tray (kW) 2.9*2 Electric defrosting(Voltage 220V) Power(kw) 23.2 Liquid in(mm) φ 11/8 Vapor back(mm) φ 21/8 Water outfall(DN) 40 Weightabout(kg) 402 Outer dimension(mm)  L 4020 Outer dimension(mm)  W 670 Outer dimension(mm)  H 700 Outer dimension(mm)  E 1740*2 Outer dimension(mm)  A 695 Outer dimension(mm)  H1 100 Outer dimension(mm)  H2 575 Total thickness of frost correction parameter list,please see attachment: Thickness of frost (mm) Correction factor ( α) 0 1 1 0.93 2 0.72 3 0.61 Air cooler is optional according to users'requirement.Please contact with our company about the perfomance parameter and data.We can assist to supply reasonable configuration for the customer.  Air Cooler Copper (aluminum) pipe aluminum finOther model parameters reference:ModelRefrigerating capacity(kW)Evaporation aream²Tube volume(L)Fan model (Voltage 400V,50Hz)Water Outfall(DN)DT1=8Kevaporating temp. -8ºCDT1=7K evaporating temp. -25ºCBlade diameter(mm)Power (kw)Air flow (m³/h)D45-50E/14F-T6.75.249.47.394500.54580040D45-100E/24F-T13.810.6101.214.784500.54*25800*240D45-150E/34F-T20.115.5147.922.094500.54*35800*340D45-200E/44F-T26.920.8197.829.574500.54*45800*440D50-65E/14F-T8.76.763.99.535000.83740040D50-130E/24F-T17.713.7130.119.055000.83*27400*240D50-190E/34F-T25.920190.528.485000.83*37400*340D50-255E/44F-T34.726.8254.738.115000.83*47400*440*2D71-435E/37F-T6854.3435.643.717101.75*314000*340*2Note:1.The data in the table are based on refrigerant is R507A, and the heat exchange tube is light pipe. 2.In this manual data is only valid at the time of publication of the data, in the purchase of products need to reconfirmed.      /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1