180L Integrated Pressure Solar Hot Water Heater with Heat Pipe CE for Shower

180L Integrated Pressure Solar Hot Water Heater with Heat Pipe CE for ShowerSFH180L Integrated High Pressure Solar Water HeaterThe SFH180L is a pressurized solar water heater that utilizes the high absorption ratio and low emissivity of the solar vacuum collector tube to convert the absorbed solar radiant energy into heat energy, which is inserted into the vacuum tube. The phase change heat transfer of the superconducting heat pipe quickly transfers heat energy into the water tank, gradually increasing the temperature of the entire water tank. The solar vacuum collector tube has the ability to naturally track the sunlight. As long as there is solar auxiliary radiation, the vacuum tube can collect heat immediately; because the phase change superconducting tube has one-way heat transfer characteristics, even in the alpine region, it can run efficiently all the year round Size of Product 1.Solar water heater tank with pressure design, working pressure up to 0.6Mpa.2.Hot water outlet pressure is equal to the running water pressure, bring you most vivid enjoy of shower and bath 3.Using phase change heat transfer and natural circulation, 100% solar energy, no running costs.4.Solar collector has double vacuum glass tube, high thermal efficiency, long service life.5.There is no water inside vacuum tube even in the extreme cold weather, the vacuum tube will not crack; solve the problem of the decline in thermal efficiency caused by water scale; solve the problem of water leakage caused by explosion or silicone ring aging ;6.Superconducting heat pipe one-way heat transfer, small capacity, low start temperature, fast heat transfer7.Superconducting heat pipe has good resistance to low temperature and extreme cold weather, suitable for use in cold areas;8.If parts of vacuum tubes of solar water heater are broken, no water leakage, the whole system can work as normal.9.The plug-in connection between the solar collector tube and the insulated water tank is very easy to install.10.The cost of the parts is low, no post maintenance is required, and no expensive maintenance costs are incurred.ModelSFH180LCapacity180LThe Number of users3-6 personsInner tankSUS304 diameter 360mm, thickness 1.2mmOuter tankStainless steel,diameter 470mmWelding procedureAutomatic double - sided argon gas protection weldingInsulationPolyurethane 55mm, temperature drop 2ºC/12hBracketsStainless steel 1.2mm,20°/30°/40°/45°Solar vacuum tubesnet aperture area:1.8 m2quantity&specifications:18 pcs*58*1800mmmaterial:3.3 high borosilicate glasscoating:AL/N/AL,AL/N/AL/SS/CUAbsorption rate >92%Reflectivity