Split Pressure Solar Water Heater (HP1800/58-200-18-APD)

Basic Info.Model NO.HP1800/58-200-18-APDStructure Separate Type Pressure Pressurized Interior Material Stainless Steel Collector ComponentsGlass Vacuum TubeCertificationCE, ISO9001, CCCProduct Description Structure:The seperate pressurized solar water heater is composed by heat collector,storage tank,controller ,Working station and installation spare partsFeatures:A. The pipeline is made of red copper and conducted by heat transfer medium liquid:water cant flow into the vacuum tubes and is operated when confined:the crust uses aluminum alloy mould material of high strength with airflow designB, Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furringC, The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservationD, The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architectureE, The equipments of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fittings for circulation and installationWorking Principle:1. When the temperature of heat collector reaches the set value, the controller will makethe circulation pump work automatically.2. The circulation pump makes heat-conducting liquid circulate automatically.3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.4. In case the teperature of the circulation pump does not reach the set value, the circul-ation pump will be shut automatically.5. In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device