Custom Flat Membrane Switch Touch Panel with Graphic Overlay

CUSTOM MEMBRANE SWITCH   STRUCTUREThe membrane switch is an operating system which integrates key function, indicating element and instrument panel. It consists of four parts: panel, upper circuit, isolation layer and lower circuit. Press the membrane switch, the contact of the upper circuit deforms downward, and the contact of the plate of the lower circuit is conductive. After the finger is released, the contact of the upper circuit bounces back, the circuit is disconnected, and the loop triggers a signal. Membrane switch has rigorous structure, good appearance and sealing performance. It has the characteristics of waterproof and long service life. Widely used in electronic communication, electronic measurement instruments, industrial control, medical equipment, automobile industry, intelligent toys, household appliances and other fields.    MaterialBase MaterialPET / PCSurfaceGlossy / Matte FinishTemperature Resistance-30ºC-120ºCThicknessMembrane: 0.05-0.25mmPlate: 0.25-2.0mmCharacteristicHigh Temperature Resistance, Wear Resistance, High StabilityCircuit LayerSilver pasteCarbon paste    TypeFlat Non Tactile TypeTympanic Tactile TypeMetal Elastic TypeLED Backlight TypeTechnical ParameterElectrical1.Voltage: ≤ 50V (DC)2.Current: ≤ 100mA3.Contact resistance: 0.5 - 10 Ω4.Insulation resistance: ≥ 100M Ω (100V / DC)5.Substrate withstand voltage: 2KV (DC)6.Rebound time: ≤ 6ms7.Loop resistance:≤ 100Ω, or 500Ω-1KΩ according to the needs of users.8.Insulation ink withstand voltage: 100V / DC Mechanical   1. Reliability service life: > 1 million times.2. Standard working force: 100 - 750g.3. The silver paste line is free of oxidation and impurities4. silver paste line width ≥ 0.3mm.5. pin spacing standard 2.54, 2.50, 1.27, 1.25, 1.0, 0.5mm.6. The bending resistance of tail cable shall be rolled 80 times with d = 10mm steel rod.7.  The adhesion of printing ink should be passed test by Cross-Cut Tester. Environmental1. Working temperature: - 20 ºC -+ 70 ºC2. Storage temperature: - 40 ºC - + 85 ºC, 95% ± 5%3. Atmospheric pressure: 86 - 106kpa Test Equipment and Test Laboratory  Application Our products are widely used in industrial control equipment, household appliances, display instruments, medical equipment, fitness equipment, security equipment, automobile instrumentation, product logo, remote control, electronic scale, intelligent furniture and other fields.FAQQ1. Do you provide free samples?A1. We can provide samples and charge freight free of charge.If you have any special sample requirements, please contact us for more details.Q2. Can the product be produced according to customer requirements?A2. We can customize according to the required specifications and drawings.Q3. Is it allowed to visit the factory?A3. Yes, we always welcome customers to visit our factory.Q4. How to solve the faults of the equipment during use?A4. Please email us about the problem of pictures or small videos. I will be better. I will find the problem and solve it.Q5. Where is your factory?A5. Our factory address is: 4th floor, No. 308, Tong'an Park, Tong'an Industrial Zone, Xiamen, China.Q6. What is the quality level of your products?A6. We have CE, ISO and other certificates.Q7. What is screen printing?A7. Screen printing refers to making a screen printing plate with pictures and texts by using the screen as the plate base and the photosensitive plate making method. Using the screen printing plate, the holes in the pictures and texts can pass through the ink, and the holes in the non pictures and texts can not pass through the inkIt can print through the basic principle of ink. When printing, pour ink into one end of the screen printing plate, apply a certain pressure on the ink part of the screen printing plate with a scraper, and move towards the other end of the screen printing plate at the same timeMoving at a uniform speed, the ink is squeezed by the scraper from the mesh of the graphic part to the substrate, so as to produce the graphic design required by the customer.Its advantages are: not limited by the size and shape of the substrateStrong optical rotation resistanceThe layout is soft and the printing pressure is smallFlexible printing methodsStrong ink layer coverageStrong adhesionSuitable for various types of inksSuitable for long-term display and expressive advertising outdoorsQ8. Can the color of the product be customized?A8. Our colors can be customized according to PMS( Pantone matching system) .Q9. Can the membrane switch be equipped with LED lights?A9. Yes. Generally, there are monochrome lamps, two-color lamps and three-color lamps. Please contact us for specific requirements.Q10. What is the thickness of the membrane switch?A10. Generally 0.9 ~ 1.3mm.Q11. What are the types of convex keys on the membrane switch panel?A11. Including round, pan, convex edge, convex key shape, no convex, etc. Please contact us for specific requirements.Q12. How many layers can the membrane switch be customized?A12. The general design i