Hospital 5 Inch Tabletop Bluetooth Patient Monitor Pm-2000A

Basic Info.Model NO.PM-2000AClassificationPhysiological Functions of Diagnosis and Monitoring EquipmentTypePatient/Fetal/Maternal MonitorCertificationCE, ISO13485GroupAllMain Unit Desktop Dimensions160mm*160mm*100mmWeight750gMeasurement DisplayColor TFT- LCD/Touch ScreenPower Supply IndicatorDual-Color LED (Red/Green)OutputDC 5V, 1.5ABatteryLi-ion Rechargeable Battery, 3.7V/7200mAhOperating Time15 Hours with Full Battery CapacityTrademarkAudoTransport PackageCartonSpecificationCE, ISOOriginJiangsu, ChinaHS Code9018193010Product DescriptionHospital 5 Inch Tabletop BlueTooth patient monitor PM-2000APM-2000A Tabletop Multi-Parameter MonitorFive parameters:ECG,NIBP,SPO2,PR,TEMP.Waveform:ECG and SPO2 waveforms. Features:Ø  Touch screen,5.0 inch color TFT-LCD, simple for operating, quickly&accurately measure the data;Ø  Build-in rechargeable Li-battery, up to 15 hours running time, support AC and DC power;Ø  Adjustable audible and visual alarms, and sensor off alarm;Ø  Long time monitoring and sleeping monitoring;Ø  Easy to carry, suitable for ambulance center, has the stand for fixing; Prior:Ø  Storage and review data up to 3888groups via Trend Graph and Trend List.Ø  USB and Bluetooth data upload;Ø  Big font screen interface is easy to observe;Ø  Back light can be adjusted;Ø  Optional Bluetooth printer to print the waveform and data out.Ø  Optional 5leads and 5leads+ETCO2 Specification:1. General Specifications:Size: 160mm×160mm×100mmNet Weight: 750gDisplay SpecificationMeasurement Display: color TFT- LCD/touch screenPower Supply Indicator: Dual-color LED (red/green)Charging indicator: A green LED 2. Power SupplyAC Power AdaptorInput: 100~240VAC, 50/60Hz, 0.7AOutput: DC 5V, 1.5ABatteryLi-ion rechargeable battery, 3.7V/7200mAHOperating Time: 15 hours with full battery capacity.(Condition: 25ºC, NIBP working period is 15 minutes)Recharge Time: 10 hours. 3. EnvironmentTemperatureWorking:0C~45CTransport and Storage: -25C~85CHumidityWorking:30% ~85 %Transport and Storage: 30% ~95 % (no condensation) 4. Monitoring ParameterECGInput:3- lead ECG cable, standard AAMI cable connectorLead Selection:I,II,IIIGain Selection:×1,×2,×4,×8Sweep Speed: 12.5, 25, and 50 mm/sFrequency Response: None filter: 0.05~100Hz (-3dB), filter: 0.5~40Hz (-3dB)Calibration Signal: 1mV square waveProtection: Against electrosurgical interference and defibrillationHeart RateMeasuring Range: 20 bpm~300 bpmRenew Time: 1 time per beatAccuracy: ±1 bpmAlarm Mode: Audible and visual alarmSpO2SpO2%Measuring Range:0%~100%Resolution:1 %Accuracy:±2 %(90%~99%), ±3 %(70%~89%),unspecified (0%~69%)Pulse RateMeasuring and Alarm Range:20~300bpmResolution:    1bpmAccuracy: ±1bpmNIBPMethod: OscillometricMode: Manual, Auto, STATMeasuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min)Measuring Period in STAT Mode: 5 minCuff Pressure Range:0 mmHg~300mmHgPulse Rate Range:30 bpm~250bpmMeasurement Rage: Adult 30 mmHg~255mmHg, Pediatric 30 mmHg~160mmHgOver-pressure Protection: Adult 300mmHg, Pediatric 220mmHgPressure Resolution     : 1mmHgThe SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MEAN value measured using this device is equal to that measured using blood pressure measurement device.TemperatureInput: Body surface thermal-sensitive resistor temperature sensorMeasuring Range: 0ºC~50ºCAccuracy: ±0.1ºC 5. Storage and ReviewMaximum Data Quantity: 3888 groupsMaximum Trend Time: Continuous 129.6 hours 6. Printer (optional)Type: Thermal micro-printerPrinter Paper: 58 mm thermal paper,Paper roll diameter≤Φ 33mmInterface: Bluetooth wireless interfaceRecording Types: Real-time printing and review data printingPower Supply:Rechargeable battery 1700mAh~2000mAh.7.2V. Charge(discharge) ≥1000times.Charge time: 2hoursWork Operation/relative humidity:0~55ºC/10~80%RHStorage Operation/relative humidity:-20~60ºC/10~90%RH Standard accessoriesStandard Packing ListColor palm patient monitor main unit1 pc3-lead ECG cable ( include surface TEMP probe)1pcAdult finger SpO2 sensor1 pcAdult NIBP cuff1 pcNIBP extension tube1 pcAC power adapter1 pcThe operator's manual1 pcSelectable AccessoryPediatric NIBP cuff Pediatric finger Spo2 sensor Neonatal wrap SpO2 sensor Bluetooth printer 5Leads 5Leads+ETCO2 Detailed images:Contact us: