Plastic Raw Material PC for High Toughness at Low Temperature Injection Molding Medium Viscosity

Plastic Raw Material PC for High toughness at low temperature Injection molding Medium viscosity https://forever-plastics.en.made-in-china.com/product-list-1.html      Product DescriptionInjection molding, Medium viscosity, High toughness at low temperatureGeneralForm                                        Resin PelletsFeature                                     Low Temperature Impact    F1                                       Medium ViscosityUses                                         TelecommunicationsPhysical                                                                                 Nominal Value                                       Test MethodDensity / Specific Gravity(23 °C)                                          1.19 g/cm³                                             ISO 1183Melt Viscosity(300 °C;1.0e+3 s-1)                                        600 Pa. s                                                 ISO 11443-AMelt Volume-Flow Rate, MVR(300 °C;1.2 kg)                     10 cm³/10 min                                        ISO 1133Molding shrinkage, parallel(60x60x2;500 bar)                   0.72 %                                                    ISO 2577Molding shrinkage, normal(60x60x2;500 bar)                    0.68 %                                                    ISO 2577Mechanical                                                                            Nominal Value                                      Test MethodTensile Modulus(1 mm/min;23 °C)                                     2200 MPa                                               ISO 527-1/-2Tensile Stress, Yield(5 mm/min;23 °C)                                60.0 MPa                                                ISO 527-1/-2Tensile Stress, Break(5 mm/min;23 °C)                               70.0 MPa                                                ISO 527-1/-2Tensile Strain, Yield(5 mm/min;23 °C)                                 5.5 %                                                      ISO 527-1/-2Tensile Strain, Break(5 mm/min;23 °C)                                150 %                                                     ISO 527-1/-2Flexural Modulus(2 mm/min;23 °C)                                    2300 MPa                                               ISO 178Flexural Stress(2 mm/min;23 °C)                                         90.0 MPa                                                 ISO 178Notched Izod Impact Strength                                                                                                          ISO 739123 °C;3 mm                                                                          70 kJ/m²-20 °C;3 mm                                                                         60 kJ/m²-30 °C;3 mm                                                                         60 kJ/m²-40 °C;3 mm                                                                         60 kJ/m²Thermal                                                                                 Nominal Value                                      Test MethodVicat Softening Temperature(120 °C/h;50 N)                     136 °C                                                     ISO 306Flame Rating                                                                                                                                     UL 941.5 mm                                                                                 V-02 mm                                                                                 5VB2.5 mm                                                                                  5VBProcessingNominal ValueDrying Temperature - Dry Air Dryer100 °CDrying Time - Dry Air Dryer4.0 hrMold Temperature80 °CStandard Melt Temperature280 - 300 °C  Company ProfileProduct ParametersOur CustomersOur Certificates Our ProductionOur Package/ShippingOur Advantages Our Samples Dongguan FOREVER Co., Ltd. Was founded in 2005 and is a national high-tech enterprise and national-level specialized giant enterprise dedicated to the research and production of polymer composite modified materials. With an annual capacity of 100, 000 tons of modified engineering plastics. Since its establishment, the company has been committed to the research of high-performance composite materials such as modified PC, PC/ABS, PBT, PA6, etc. Its products have been widely used in industries such as LED lighting, consumer electronics, new energy, security equipment, and small household appliances, providing customers with efficient delivery experience, ultimate price advantages, and strict quality assurance, contributing to the creation of a green and environmentally friendly world.Dongguan FOREVER Co., Ltd's main products has obtained UL certification for RTI authorized temperature, outdoor weather resistance F1 and 5VA flame retardancy grades, as well as recycled-certified post-consumer low-carbon circulation products. Dongguan FOREVER Co., Ltd's products are highly rec