Heat-Pipe Tube for Pressure Solar System (INLIGHT-V)

Three target all-glass vacuum tube, more efficient and good performance, especially for solar energy collecting to heat water Heat Pipe Solar Collector Technical Parameters Working Principle: Tri-target solar vacuum tube, connecting with water tank or manifold, when it works, cold water flows down into the vacuum tube, and there it is heated with solar energy absorbed by the coating outside of inner vacuum tube, the solar will be absorbed efficiently by the coating with little loss of heat because of the vacuum between the inner and outer glass tubes, and when cold water becomes hot, hot water will rise up to water tank or manifold because of the larger proportion to cold water, cold water again flows into solar vacuum tube for another heating process.       Structure    All-glass double-tube co-axial structure    Glass material    High borosilicate 3.3 glass    External  pipe  diameter  and    thickness    Φ =47± 0.7mm    & =1.6mm,     Φ =58± 0.7mm    & =1.6mm,    Φ =70± 0.7mm & =2.0mm    Internal pipe diameter and thickness    Φ =37± 0.7mm & =1.6mm,     Φ =47± 0.7mm & =1.6mm,    Φ =58± 0.7mm & =1.6mm    Pipe length    800mm,         1200mm,     1500mm,     1600mm,    1800mm,     1900mm,     2000mm,     2100mm      Absorbing  coating propertyStructure    Cu/SS-ALN(H)/SS-ALN(L)/ALN  Sediment    method    3 target magnetron sputtering plating  Specific    absorption    as=0.93~0.96(AM1.5)  Emission ratio    ε h=0.04~0.06(80± 5)    Vacuum tightness    P≤ 5.0X10 -3 Pa    Idle sunning property parameters    Y=260~300m2. /KW    Solar irradiation     for obtaining a     preset water     temperature    H≤ 3.7MJ/m2(Φ 47)    H=3.74~4.2MJ/m2    H≤ 4.7MJ/m2(Φ 58)    H=2.9~3.2MJ/m2    Average heat loss coefficient    ULT=0.4~0.6W/(m2. )  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1