Smaraad China Factory 300W 600W 800W 1000W 1500W 12V 24V MPPT Wind Turbine Solar Panel Hybrid Boost Controller

Smaraad China Factory 300W 600W 800W 1000W 1500W 12V 24V MPPT Wind Turbine Solar Panel Hybrid Boost ControllerProduct DescriptionGeneral Safety InformationØ Before receive the product, check it carefully. Make sure whether the product is damaged during transport. If it is damaged,contact the shipping company or our company immediately.Ø All installation and electrical work must only be performed by professional personnel.Ø Without any professional guidance, do not disassemble or attempt to repair the controller.Ø Do not use the controller without batteries.Ø Do not cut off the connection of controller and batteries when controller is working normally.Ø Keep children away from controller.Ø Do not allow water to enter the controller.Ø Confirm that power connections are tightened to avoid excessive heating from a loose connection. Make sure cables are suitablefor systemProduct Parameters                          MAX-T48-W400S200II-1Battery parametersApplied battery voltage48V Battery protect methodReverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load)Voltage at the over voltage protection point58.0V±0.2VVoltage at the over voltage recovery point55.0V±0.2V Voltage at the under voltage protection point42.0V±0.2VVoltage at the under voltage  recovery point46.0V±0.2VBattery temperature compensation5mv/ºC/2V (settable) (optional component)Wind turbines input parametersRated power of applied Wind turbines 400W/48VRated power of the terminal18A dc (after rectification)Max. input current of the terminal30A dc (after rectification) The default speed of the Wind turbines generation with limited speed500 Rpm (settable)The default current of the Wind turbines generation with limited current30A (settable)Wind turbines protection methodover rev protection, over current protection, induction lightening protectionUnloading methodPWM stepless high-frequency soft unloading (built-in)MPPT functionBoost MPPT model ( automatic tracking or 5 segments curve tracking) Input current of MPPT channel12APV input parametersRated input current of applied PV200W48V(standard)Rated input current of terminal5A(standard) Charging voltage drop