Water Purifier for Bw-8040 Commercial & Industrial Brackish Water Treatment System of 8 Inches Reverse Osmosis RO Membrane-SA

Water Purifier for Bw-8040 Commercial & Industrial Brackish Water Treatment System of 8 Inches Reverse Osmosis MembraneReverse osmosis membranes can be used for a variety of fluid separations. Currently, the most widely used reverse osmosis membranes are cross-linked aromatic polyamide reverse osmosis membranes. Usually, m-phenylenediamine and trimesoyl chloride are used for interfacial polycondensation on the surface of porous polysulfone supported membranes.LP brackish water series membrane elements have the characteristics of low-pressure operation, high water production and good desalination performance. It is suitable for high-purity water equipment in the electronics and power industries, industrial water of various scales, and water for various industries such as boiler feed water in power plants.This standard provides product specifications for RO elements for industrial and similar purposes(here in after referred to as RO membrane elements).The product specification   TYPEProduction Flow Rate GPD(m³/d)Stable Rejection RateOperation PressureRecovery Rate4040-LP2400(9.1)99.5%225 psi (15bar)15%4040-ULP2400(9.1)99.2%150 psi (10bar)15%4040-XLP2400(9.1)98.5%100 psi (7bar)15%8040-LP10500(40)99.5%225 psi (15bar)15%8040-ULP10500(40)99.2%150 psi (10bar)15%8040-XLP10500(40)98.5%100 psi (7bar)15%   LP(Low Pressure)ULP(Ultra Low Pressure)XLP(Extra Low Pressure)Test Conditions2000 ppm Nacl Solution225 psi Applied Pressure77F (25ºC)Operation Temperature15% Pemeate Recovery6.5-7.5 PH Range1500 ppm Nacl Solution150 psi Applied Pressure77F (25ºC)Operation Temperature15% Pemeate Recovery6.5-7.5 PH Range1500 ppm Nacl Solution100 psi Applied Pressure77F (25ºC)Operation Temperature15% Pemeate Recovery6.5-7.5 PH RangeTypeConfiguration: Low Pressure SpiralMembrane Polymer: Composite polyamideMembrane O Ring: EPDMOperating Limit:Maximum Operating Temperature113ºF(45ºC)Maximum Working Pressure600psi(41.0 bar)The high pressure drop15psi (1.0bar)Continuously operating PH range a3-10Short wash PH range (30min) b2-12Maximum feed water SDISDI 5Tolerance Of Free Chlorine