2023 Wholesale Lithium Battery Pack Deep Cycle 12V 24V 100ah 200ah Lithium LiFePO4 Ion Cell EV Battery for Outdoor Power Best Price Solar Battery

Product DescriptionBattery Pack Dimension(L*W*h)and connector type320*266*254mm/12.6*10.5*10inch's(metal case size)Red and black terminals with M8 screw hole,Terminal height:18mm above caseBattery Pack Weight22.7 ± 0.2KG50 ± 0.5LBSRated Capacity≥ 100 Ah @ C/3,23ºC/73ºFMeasured as 2.5V cut off at cell levelOperating Voltage25.6 V (average) @ C/3, 23°C/73°F Working voltage range is 29.2 ~ 20.8 VCharging Voltage≤ 29.2 V @ CC/CV charge modeCan be changed to 28.8V for longer cycle lifeDischarge cut off Voltage20 ~ 20.8 V (When any cell volt reaches2.5V may trigger this protection)Set device (like a controller) low volt protectionmuch higher to avoid trigger this protection.Maximum Discharge Current≤ 120 A @ 30min,23°C,30%≤ SOC ≤100%≤ 260 A @ 15s, 23°C, 30%≤ SOC ≤100%≤ 320 A @ 0.5s, 23°C, 30%≤ SOC ≤100%Please consider heat accumulation if long time discharging with a large continuous current.Maximum Charge Current≤ 50 A @ 60min, 23°C, 20%≤ SOC ≤70%≤ 100 A @ 5min, 23°C, 20%≤ SOC ≤70%Please consider heat accumulation if long time charging with a large continuous current.Battery Cycle Life≥ 3000 times @ 80% DOD, ± C/3, 23°CAfter cycles can deliver ≥ 75% rated capacityInternal Resistance ≤ 20 ± 2 mΩ DCIR test method, @10s, 50% SOCTemperature protectionFor charging process0 ~ 5 ºC ≤ sensor for cell ≤ 52 ~ 58 ºCIf internal sensor detects a temperature that isoutside of range, BMS will shut the pack off.Temperature protectionFor discharging processsensor for cell ≤ 65 ~ 70 ºCIf internal sensor detects a temperature that isoutside of range, BMS will shut the pack off.Surrounded workingcondition temperatureCharge: 5 ~ 45°CDischarge: -20 ~ 55°CSuggested for charging: 10 ~ 40°C Suggestedfor discharging: -10 ~ 45°CStorage Temperature-10°C ~ 40°C ( for ≤ 3 months) Keep SOC at 40~60% for long term storageThe battery pack has handle(s) for lifting and carrying, and an intelligent indicator to show the voltage, current,SOC, etc. There are also red and black terminals (which have M8*18 screw holes) built on top for connection toa power cables. In addition, there are 3 bolt holes on each long side of battery pack, these screw holes are sizedfor bolts of M4*8, means battery packs can be fixed with such bolts. These bolt holes do not affect the IP66rating, as the ends of the holes are completely sealed.Operations on intelligent indicatorFirstly, press "A/Ah/set" button to light on indicator, then,If press "V/" button, it will show SOC percentage.If press "A/Ah/SET" button, it will show Current (Ampere), again press "A/Ah/SET" button, it will show Capacity (Ah).(Indicator can be manual calibrated, for more information,Please contact us for details.)  Detailed PhotosApplication: CertificationsPackaging & ShippingCompany Profile            Bestgo Battery Co., Ltd. is dedicated to providing advanced lithium ion batteries which feature both high power and energy densities with a long lifespans and ultra-safe performance. The cells are made using some unique manufacturing technologies developed over the years. These completely automated unique battery construction processes allow Bestgo to build higher quality lithium batteries which have superior performance characteristics over older manufacturing techniques. Using those unique technologies makes it possible to produce cells that have amazing consistency. Every step of the cells construction is tested with automated high precision quality control equipment. With these cells building the standard battery modules, Bestgo is in a very good position to help create solutions for a variety of energy storage systems applications. Our AdvantagesOver the past 10 years, we have rich experience in customization services. Our senior engineers will give you the best solution for your confirmation according to your detailed requirements!All the cells we used in our battery pack are grade A electric vehicle level cells, which fully ensures the performance and safety of the battery pack.After Sales ServiceFor both warranty and after-sale service, the following will be enforced:Warranty year(s) for this model of battery pack are specified by supplier. During the warranty period, we will takeresponsibility for the replacement or repair for any of the following issues:• The whole battery pack cannot be charged or discharged.• Under the standard testing condition, the capacity is less than 80% in the end of the first year, or 70% in theend of last warranty year (if the last warranty year is provided in the warranty period).• There is liquid leakage.• There is some damage on battery pack's case and accessories that are caused by the battery.• The charger is not working properly.However, we will not take responsibility in the following situations:• Expired warranty period.• Battery damage as a result of improper handling.• The battery pack is dismantled and converted.• There is visible damage to the BMS that was not caused by battery failure.• Damage caused by using an incorrect charger for the pack./* March