Portable Type Fiber Laser Marking Machine Small Laser Marker

portable type fiber laser marking machine small laser markerWorking principleThe laser beam from the laser (through the beam expander mirror) enters the marking head, and after the reflection of the scanning oscillator 1 and scanning oscillator 2 reaches the f-Theta flat field lens, through which the lens is focused to form a high energy spot (15-20μ) with a small area. The scanning oscillator is driven by a highly sensitive detector-type motor, and the computer control system controls these two motors to deflect at a certain angle, while controlling the laser beam off and on, finally marking the required symbols and patterns on the workpiece.Product features1.It can process a variety of metal and non-metal materials. Especially for high hardness, high melting point and brittle materials, the marking is more advantageous.2.Non-contact processing, no damage to the product, no tool wear, and good marking quality.3.The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small.4.High processing efficiency, computer control, and easy automation.  StyleCabinet Power20W/30W/50WLaser BrandRaycus (Maxphotonics/lianpin)GalvanometerSinoMain boardBeijing JCZSoftwareEZCAD 2.14.10 Marking Area110mm*110mm Optional Marking Area110mm*110mm / 150mm*150mm /200mm*200mm Marking Depth≤0.5mm Marking Speed≤7000mm/s Minimum Line Width0.012mm Life-span of Fiber Laser Module100, 000hours Beam QualityM2